How to do waterproof hotel toilets? What are the steps, and what materials are used?

The bathroom is not only small in area and has many pipes, but also more than 80% of the water leakage problems are concentrated in the yin and yang corners, pipes, sanitary ware, and floor drains, so these places need to be paid special attention to when doing waterproofing.

Of course, in addition to choosing the right waterproofing material, standard construction is also important, and only in this way can the best waterproofing effect be guaranteed.

Here's the standard construction method:

1. Chisel the cracks and parts that need to be repaired such as the root of the pipe and the floor drain into a "V" shape, clean them, and sprinkle them with water to moisten them;

2. Add water (water-cement weight ratio 1:2 3) to the [permeable crystalline repair mortar] and mix it evenly, and carry out repair construction before the initial setting (within 5 minutes), and the root of the pipe, the perimeter of the floor drain, the yin and yang corners, and the root of the wall should be made into r angles;

3. After the final setting of the repair mortar, stir the powder and liquid material of [durable waterproof slurry] evenly, let it stand for 3 minutes, stir it again and evenly brush it on the base surface, and it should be cross-brushed twice, and only after the first surface is dry can the second construction be carried out;

4. Anti-stampede after completion, closed water inspection can be carried out after 48 hours.

The correct practice of the bathroom should be like this: now after the cast-in-place floor slab is completed, make 30 thick C25 fine stone concrete mixed with 10% impermeable microcrystalline waterproofing agent leveling layer, after the completion of the wall masonry painting with 1: cement mortar mixed with 10% impermeable microcrystalline waterproofing agent in 2 times to wipe the surface 20mm 25mm thick, the purpose of this method is:

The impermeable microcrystalline waterproof mortar rigid waterproofing layer can achieve permanent waterproofing! It is also the waterproof layer that sanitary waterproofing plays a key role, and then do the second waterproof layer on the surface of the rigid waterproof layer: JS water mud base flexible waterproof coating is thick, and the flexible waterproof layer plays an auxiliary waterproof role, and so on after these two waterproofs, the waterproofing of the bathroom is completed, that is, the rigid and flexible combination of two waterproofs, this is the standard bathroom waterproof practice.

In the choice of bathroom waterproofing materials to shop around,

The hotel decorates the bathroom, and it is recommended to use Napoli integral bathroom products. There is no need to do waterproofing. There are pictures to see.

Buy a full bathroom, all at once. Jinjiang, Hanting, Yibai and other chain hotels are all in use.