Wrigley toilet lid does not buffer, how to repair

The customer service said that the shaft behind the lid was broken, and it was replaced by a 25, a pair of 50, and the door-to-door fee was 50

1. The two rings shown in the figure below are the positions of the two fixing holes; >>>More

Each lid is secured by two screw holes at the back, bolted underneath the toilet bowl – you need to reach for it and remove it!

This depends on the model of the toilet, and the material of the toilet seat is different for different models. Generally, the toilet seat is made of urea-formaldehyde resin, PP board, ABS plastic, PVC, solid wood, plexiglass, etc., it is recommended to buy urea-formaldehyde resin or PP board material cover.

1. How to disassemble the Wrigley toilet lid 1. When disassembling, you need to find the screws that fix the toilet lid first, and under normal circumstances, it will be fixed on both sides under the toilet lid, and after finding it, you can use a screwdriver to loosen the fixed screws; Then remove the toilet seat, choose a new toilet seat of the same model, and install it on the toilet according to the requirements. Second, what problems are easy to occur in the process of using the toilet 1, the problems that are easy to occur in the process of use, mainly the problem of toilet blockage is very common, if there are more foreign objects in the toilet, then it is easy to cause blockage when flushing the toilet, you can use the toilet plug to flush the blockage, or use the toilet dredge agent to pour into the toilet, and then flush it down with water. 2. The flush valve of the toilet is also prone to damage, once damaged, it also needs to be replaced in time, you need to understand the size of the original flush valve, and then replace it with a size and specifications.