Please ask whether you can t use quick drying thinner for solid wood furniture color repair

It is not easy to paint a piece of furniture, it is recommended that you:

It's best to find a professional painter to do it.

There are a lot of things you don't understand and trouble when you do it yourself.

Besides, don't put tung oil on it again!!

It will affect the coloring, after the tung oil is on the furniture, it can not be painted well, and the tung oil is generally made of alkyd paint, and it cannot be done with good results.

Nowadays, furniture paints are generally polyester.

However, it can also be remedied by tung oil, and then seal two partial paint sheets (industrial alcohol + lacquer sheets) and then make lacquer solid wood The color difference is large, and oak wood belongs to light-colored wood.

No matter how much you fix it, there is a color difference.

Unless you make the color darker overall, maybe it's better.

We introduce three types of coloring.

Before the water color is not painted (tung oil), it can be applied to the water color.

This is also the easiest, if the tung oil is not thick, you can also try the material has iron red, floor yellow, ink, lithop powder (lithop powder can not buy big white powder or putty powder) This ratio is really hard to say A small bucket of paint and half a bucket of water plus two or three lithop powder, other colors look less and less You can use a piece of oak wood-style color, brush the color with a 4-inch bristle brush, and then wipe it off with a towel. The amount is your own, and you can do more.

After wiping the dry and thoroughly sealing the two-bias paint sheet, then apply the paint.

Mask color (oil).

This is generally a spray color, the last 2 partial paint inside the color essence (oily) color matching, done well, the color difference will be much smaller, the color essence has red, yellow and black three colors.

The color of the oil seed is not much different, that is, the wood grain is not too clear, and the three kinds of oil are red, yellow and black, and the desired color is diluted with kerosene.

Prepare 2 wool brushes and towels.

The first wool brush brush oil is planted on the furniture, don't wait for it to dry, use the second wool brush, rearrange it from the place where it has been brushed, be sure to brush evenly, be light, drain the bristles on the towel and gently wipe it off, wipe off the excess oil on the brush.

When the whole furniture is finished and dried, seal the two partial paint sheets and then paint them.

The furniture is primed six times, and it is fine to color.