-
Anonymous users2024-01-24At the bottom of the toilet, then there is the pipe that leads to the inside of the wall. In the usual commercial and residential sewers, the nozzle is changed to the corresponding wall.
Choose which drain to use, seal the other drain with a plugging material, put a sealing ring on the drain, glue the ground, fix the direction and make a circle of glue around the toilet.
When you say water out, where is the water tank or slow water when flushing? >>>More
Open the water tank can see a water valve, there is a water float on it, generally there is a screw rod, directly screw the screw rod to adjust the height of the float, the higher the water float, the more water storage, the lower the water float, the less water storage.
If the original toilet sewer pipe in your house is the water from below, you should not change the water again, because it is very troublesome to change the sewer pipe, and you need the consent of the owner downstairs to start construction. If you don't do it, the bathroom floor will leak.
The water outlet valve is installed in the water tank with a screw ruler wire, and the split is to be disassembled at the bottom of the water tank and tightened with a large plastic Ling Xingming nut. Zhidong sanitary ware.