-
Anonymous users2024-01-24Generally speaking, no more than 100 meters per circuit is OK, and no more than 8 circuits per water splitter. As for the proportion you said, I don't understand too much, if you lay the pipe at a distance of no more than 20 cm, the number of square meters that can be carried by each road is about 15-20 square meters.
-
Anonymous users2024-01-23There is no uniform requirement for the length of the underfloor heating pipes in each area.
The length can be calculated according to the specified laying spacing, the required temperature, and the type of underfloor heating pipe selected.
-
Anonymous users2024-01-22Yes There's no requirement that you just make it hot.
It's best not to go all the way, because the bathroom and bedroom along the way will be opened together, which is a bit wasteful, and there will be no radiator hot floor heating is not hot, and there may be a situation where the radiator is not too hot, because the water temperature of the radiator is higher than that of floor heating.
It is recommended that you change to a new air switch with more power, because you have too many electrical appliances connected to this route.
Step 1: The design of the house must be discussed in advance, so as not to cause confusion caused by later changes. Step 2: >>>More
The size of the bathroom floor tiles is small, and the laying of a small area is generally a centimeter cement surface, which can be more serious.
It's a nice, rural house for it!
Because the Northeast and Jiaodong are relatively cold, there must be a soil kang. >>>More