How to repair the peeling of furniture feet due to moisture

Updated on furniture 2024-06-24
2 answers
  1. Anonymous users2024-01-24

    Solid wood furniture in the damp, will appear on its outer paint surface of small water droplets, serious will appear sporadic mildew, in the cleaning should first use water or mild cleaning agent to remove the mildew on the furniture, and then with dehumidification equipment (home air conditioning can) gently blow the damp part, dehumidification should be careful not to blow directly, remember not to be in a hurry, be sure to remove the water slowly. Finally, gently wipe it off with a cotton cloth or a soft, dry towel.

    Wooden furniture must be "shade dried" and cannot be exposed to the sun, otherwise the skin and interior gradient of the furniture will increase, so that the furniture will crack and lose its use value. In the usual maintenance, pay attention to the protective layer on the surface of panel furniture, and try to protect it from falling off. Solid wood furniture can be coated with walnut oil every once in a while, which can keep the cells of the furniture full and not easy to be invaded by water vapor.

  2. Anonymous users2024-01-23

    Get a dehumidifier, and the humid weather is not only good for the furniture.

Related questions
2 answers2024-06-24

1. All lacquered and waxed.

You can use a small brush to dip a little bit of paint of the same color to make up the scratches so that the color is not visible, and then wax. >>>More

1 answers2024-06-24

In the case of moldy solid wood furniture, you can first use a clean soft cloth dipped in a neutral detergent or a special furniture cleaner to remove it. Then lightly apply a layer of furniture wax or essential oils to the musty area, and place a bar of soap or a gauze bag filled with sun-dried tea residue in the musty area to help eliminate the musty smell. Generally speaking, solid wood furniture is mostly produced after strict drying procedures, but the moisture-proof maintenance of solid wood furniture can not be taken lightly. >>>More

1 answers2024-06-24

How to repair cracks in solid wood furniture.

First of all, use the tip of a knife to split into several smaller cracks along both sides of the crack, the smaller the better, so that the original large crack will become smaller, and finally the large crack and the small crack are basically the same, almost less obvious. >>>More

3 answers2024-06-24

Now BAI is learning furniture repair repair technology, and the market prospect is still very wrong, mainly the following two. >>>More

2 answers2024-06-24

Don't worry too much if your furniture has been accidentally burned by cigarette butts, soot or unextinguished matches, leaving burn marks. As long as there is no wood below the burnt paint film, it can be remedied. Find a chopstick head, wrap it in a small piece of hard cloth, gently wipe off the burned paint part, and then recoat it with a thin layer of wax, the burn marks can be removed, and the paint layer is repaired.