The floor plan will not be seen, ask for professional guidance, the bathroom wants to be larger, whi

Updated on Bathroom 2024-06-10
3 answers
  1. Anonymous users2024-01-24

    The wall thickness of the load-bearing wall will be significantly thicker than that of the non-load-bearing wall on the floor plan. It is usually indicated by a thick black line in the floor plan of the purchase contract. THE THICKNESS OF THE LOAD-BEARING WALL IS SECOND ONLY TO THE EXTERIOR WALL, AND THE THICKNESS IS GENERALLY 24CM.

    Therefore, the wall of the black and thick line on your picture must not be moved, because it is a load-bearing wall. To be on the safe side, you can double-check with the developer if this is the case, as this floor plan is provided by the developer.

    On the premise that the thick black line represents the load-bearing wall and the thick hollow line represents the non-load-bearing wall, in order to expand the bathroom (that is, the cabin between the original 2 bedrooms), your unit can be modified as follows:

  2. Anonymous users2024-01-23

    The exterior walls are not to be demolished! Or you're going to your neighbor.

    There is also the fact that the black walls in the interior are load-bearing walls and cannot be moved.

  3. Anonymous users2024-01-22

    Just looking at your drawings, the wall in the master bedroom can be removed.

    If you can put the toilet inside the water and the toilet position mark, see if you can arrange it better :) it would be better to have the length and width of the toilet position :)

    Let's ask

Related questions
Find CAD ceiling floor plan online, etc
1 answers2024-06-10

The ceiling plan has its own requirements, according to the requirements to draw a look at the ceiling drawing, the drawing is the general language of construction! Didn't you study when you went to school?

Find a fully CAD furniture floor plan
3 answers2024-06-10

Ask whether the furniture is included in the floor plan of the kind of CAD, or a simple CAD floor plan library, generally speaking, it should be the floor plan of the furniture applied to the entire interior of the house, put a few planes to see if it is like this.

Finding a 500,600 square meter restaurant floor plan does not require an interior layout, as long as
3 answers2024-06-10

There is no difficulty in the restaurant of five or six hundred square meters, the main thing is that there is only one outer frame, and it is impossible to remove all the floor layout of the ceiling and the ground façade, you can put a few. The CAD construction drawings and renderings of the restaurant with a similar area are 3D for reference.

Find the floor plan of the CAD table and chair furniture interior
1 answers2024-06-10

I'll give you a copy of the trembling omen, hoping to help you.

Find the floor plan of the CAD dresser
1 answers2024-06-10

Find the floor plan and model of the CAD dresser as follows: >>>More