Now what kind of waterproof material is generally used to repair waterproof leaks in the bathroom, f

Tools: 1 small shovel, 1 bucket, 1 pair of rubber gloves.

Method:1Preparation.

This strain is a water-soluble liquid, and protective gloves should be worn when using it. Do not swallow or splash into eyes, rinse with water if contacted.

2.Grassroots treatment.

The surface of the base should be smooth, solid, clean, free of oil and clear water. Tile gaps, dark corners and pipe roots and other details with a shovel and brush to clean up the dust and attachments, if there are multiple floor drains or the slope of the floor drain is relatively large, you can use dry powder (dry cement powder, putty powder) to build a cofferdam treatment. After cleaning, plug the floor drain.

3.Prepare waterproofing fluid.

Add 23 25L of clean tap water with a water temperature of 18 degrees to 2 degrees in the bucket (hot and warm water are prohibited), open the A1 material package and pour it into the water, stir well until there is no particle, and it will not be observed by the naked eye. Then add A2 and stir well, and finally add B and stir well (the total mixing time should not be too long, about 5 minutes is appropriate).

4.Waterproofing construction.

Pour the mixed waterproof liquid into the operating range, stand still for 80 120 minutes, and it is strictly forbidden to add water and other substances to the operating range during the stationary period so as not to affect the polymerization and crystallization of water molecules. Considering that most of the domestic laying finishing layers are dry layers, in order to achieve the best waterproof plugging effect, it is necessary to ensure that the depth of the waterproof liquid on all parts within the operating range is not less than 5mm.

5.Water storage test.

After all the crystals of the waterproof liquid are solidified, the surface crystals are cleaned off, and the remaining small amount of crystals can be opened and directly rinsed with water. After cleaning, plug the floor drain and do a water storage test, and check that there is no water leakage after 24 hours.

If you make a bathroom, you don't mind using the waterproof coating of Qianrui Waterproof Company, the effect is very good, and if the water leakage is not very serious, you don't need to dig it up to make ......Their company is located at 2533, Block A, Changsha Red Star International

First of all, it needs to be explained that waterproof material and leak plugging material are two different concepts, simply put, waterproof material is used to do waterproofing before leakage, the purpose is to avoid leakage, and it is carried out before the leakage occurs. The plugging material is used after the water leakage has occurred, in order to plug the water leakage in time, and it is carried out after the water leakage.

Now the common waterproof materials include mortar waterproofing agent, waterproof coating, and waterproof membrane, and the plugging material has no water leakage. Therefore, you need to choose whether you need waterproofing material or leak plugging material according to your needs.