What materials are used for waterproofing in the bathroom

Updated on Bathroom 2024-06-29
5 answers
  1. Anonymous users2024-01-24

    Environmental protection. If you choose a product that is not environmentally friendly, after the waterproof layer is made, the harmful gases will be slowly released under the thick floor tiles or cement. Therefore, if you want to buy waterproof materials, you must go to the regular building materials store or supermarket, choose a well-known brand, generally good brand products are equipped with product test reports, product certificates and China environmental labeling certification of the ten ring mark or CTC mark.

    I hope you can adopt it, thank you.

  2. Anonymous users2024-01-23

    cannot live harmoniously with

  3. Anonymous users2024-01-22

    Waterproof coatings or waterproof membranes are OK, but it is best to choose waterproof coatings for home decoration waterproofing, because the degree of environmental protection is higher.

  4. Anonymous users2024-01-21

    The bathroom is recommended to be waterproof, and the floor is solid and easy to coat, and the walls and floors can be used to prevent the wall from falling bricks, and the painting area is large and cost-effective.

  5. Anonymous users2024-01-20

    Now the bathroom is waterproofed with a building solid and easy to apply waterproof coating.

Related questions
15 answers2024-06-29

1. The first thing to say is to use polyacrylate emulsion, ethylene-vinyl acetate copolymer emulsion, etc., this material belongs to a liquid material, which adds cement, quartz sand, light and heavy calcium carbonate, etc., an inorganic powder through reasonable proportioning, composite made of a two-component, water-based building waterproof coating. >>>More

8 answers2024-06-29

Bathroom waterproofing, generally we will directly recommend the use of mortar waterproofing agent, not only with the base surface sticky firm, and high puncture strength can be with the same life as the building, the construction is simple and cost-effective, is now the preferred material in home decoration waterproofing!

2 answers2024-06-29

Do waterproof, do not do the height of the whole wall, do more than one meter, can be pasted, the porcelain worker knows.

3 answers2024-06-29

It is recommended to use cement-based waterproof materials, which can be attached to the surface of the cement layer and will not cause hollowing and shelling of floor tiles and tiles; Others, such as asphalt, coils, etc., have the problem of hollowing and shelling. The price is high and low, generally in 30 yuan square meters of products, the quality is good. Hope to adopt.

5 answers2024-06-29

with a water repellent agent. First use waterproofing agent mixed with cement mortar to do it at the base of the kitchen or bathroom, and after it is dry, then use waterproofing agent mixed with cement ash to brush a layer on the surface layer for the first time, so that the main purpose is to plug the small holes produced after the first drying, and the root of the pipe should be carefully brushed. >>>More