Why does solid wood flooring still smell sour after one year of use?

Updated on Solid wood 2024-06-29
1 answers
  1. Anonymous users2024-01-24

    The solid wood floor still has a sour smell after one year of use, indicating that the seal is better, and the source of the sour smell is the glue used for bonding.

    The surface has something like a plastic sheet is polyester floor paint, the middle is wood, and the last layer is moisture-proof aluminum foil, which is glued to the wood using white latex (polyethyl acetate); But don't worry, this sour smell is harmless to the human body, it just smells bad.

Related questions
2 answers2024-06-29

If the wooden floor still smells for a year, it should be excessive formaldehyde. There are many ways to detect formaldehyde, you can find a professional company to test and treat, but the price is a bit high, you can test it yourself, buy a formaldehyde test box to measure it yourself, and carry out formaldehyde treatment, but ventilation is the best way, that is, the time is relatively long.

2 answers2024-06-29

The room on the second floor should not be too damp, so it is recommended that you carefully check whether there is any pipe leakage, if so, you should immediately find the property company for maintenance, in the case of confirming that there is no pipe leakage, after replacing the moisture-proof film under the floor, the floor that can be used after drying will be re-laid, and the tile will not be used again.

1 answers2024-06-29

Generally, the wall tile is glazed brick, and its embryo body is ceramic, and the water absorption rate is large, in other words, the brick embryo body has more voids and the strength is not high; The main component of paving wall tiles is cement, cement from the initial setting to the final setting of this stage will produce a chemical reaction called hydration heat, after the moisture in the cement slurry is absorbed too much by the wall bricks, its own heat dissipation state is general, it is easy to be heated and expanded, and the wall tiles are affected by the solidification and expansion of cement slurry will also be driven to rise, it is easy to produce hollowing, wall tile cracking, or glaze cracking of wall tiles; The reason for this situation is that the quality of the wall tiles purchased by the developer is poor, and the workers who pave the wall tiles have not been able to soak the wall tiles for enough time, both of which are for the reasons, and it is recommended that they be sued together and make them co-defendants, and let them distinguish and share the mistakes in court.

1 answers2024-06-29

At present, there are three main materials for the partition of domestic toilets: one is a pure generation of anti-compact, which is an environmentally friendly material, and has the characteristics of waterproof, fireproof, antibacterial and high hardness; The second is the counterfeit anti-compact property, which has poor waterproofness, fire resistance and antibacterial properties, not to mention its hardness; The third is the melamine version of the particleboard material. Judging from the situation you described, it should be the third type, and it may still be a very inferior particleboard. >>>More

2 answers2024-06-29

Muyaju pure solid wood geothermal floor helps you analyze: how to protect the rights of solid wood flooring in less than a year after being installed in a small area? >>>More