What is the safe thickness of the bathroom floor

Regarding the specific thickness of the floor in the kitchen and bathroom, the first thing is to consider the area of the slab, and the static load of the upper part and the live load, and calculate the design strength of the concrete, the design specifications of the reinforcement, and the thickness of the slab according to the maximum bearing value. GENERAL COMMERCIAL AND RESIDENTIAL BUILDINGS, WITH AN AREA OF NO MORE THAN 10 SQUARE METERS, AND A BOARD THICKNESS BETWEEN 8CM AND 10CM. As you said, it is only 4 cm, so to speak, it is a quality problem.

It is conceivable that the general cast-in-situ surface, the inside is the upper and lower double layers of steel bars, and the concrete of each layer of reinforcement from the upper and lower plate surfaces should be retained at least 2 cm, and these two centimeters are called the steel bar protection layer in professional terms, and then added to the thickness of the two layers of steel bars. With the minimum reinforcement, calculate: the protective layer.

Then the 40CM plate thickness you said is an example, that is, the remaining distance can not be satisfied at all, in other words, that is, at least the steel bar is exposed, so that it can be installed. Therefore, it can be determined that the floor of your bathroom is four centimeters, which is a quality problem.

The thickness of the bathroom floor is normally 4-6cm lower than your indoor floor, and the indoor floor is normally 12-16cm, so the thickness of the national standard floor slab of the bathroom is between 8-10cm. What you said about 4cm is not true, your visual inspection is wrong, I estimate that the thickness of your bathroom floor is about 6cm. Therefore, you can go to the sales office to ask for compensation, if you ignore it, you can go directly to the Consumer Association to complain, or you can go to the Construction Bureau to report.

The thickness of the floor slab of the national standard for toilets is between 8 and 10 cm.

Toilet is a combination of toilet, toilet, and bath. Residential bathrooms are generally divided into dedicated and communal. The dedicated one serves only the master bedroom; The common ones are connected to the public walkways and are shared by other family members and guests.

According to the layout, it can be divided into three types: independent, dual-purpose and eclectic. According to the form, it can be divided into semi-open, open and closed. At present, it is more popular to distinguish between dry and wet partitions.

THE THICKNESS OF THE ROOF STRUCTURE OF THE GENERAL HOUSE IS 8CM TO 12CM, WHICH IS TOO THIN TO COVER THE STEEL FINE, TOO THICK, OVERWEIGHT, AND THE STRUCTURAL COLUMNS AND BRANCHES CAN NOT STAND IT, ACCORDING TO THE DESIGN DRAWINGS

Are you buying a rough house or a clear water house The name of each place is different It is the kind of house that has not been renovated The thickness of the floor slab on the side of Tonghua in Jilin is generally about 12 centimeters (cm) But the bathroom can be slightly thinner than the ground of other rooms And it is also rougher than the ground of other rooms Because the bathroom is a place where there is often water So it involves making a layer of waterproofing A layer has been done during construction But before decorating the house, you still have to do it carefully again Because once the decoration is completed, it is very troublesome to leak water.