-
Anonymous users2024-01-24It is enough to add a valve to the hot water pipeline of the solar energy, and it cannot be used at the same time!
1. Use bricks to build brick columns and paste tiles on the outside. >>>More
Generally, PPR pipes are used for toilet waterways, and 1216 pipes are used for solar water pipes, and the connection of two water pipes is realized through an adapter joint.
Then you have to complain to the government ...
Ask the state to cancel this policy! >>>More
The place should not be changed, the solar panels should be hung outside the balcony, the water storage tank should have wires connected to the panels, the length of this line is limited, the tank and the panel should not be too far away.
Hello, "Black Porcelain Old Man" reminds you: the wall-mounted solar medium is made of heat conduction fluid, the basic component is propylene glycol, which is similar to the performance of antifreeze (ethylene glycol) added by automobiles, but it is not corroded, and the freezing point is lower, and it will not have an adverse effect on the heat conduction copper tube and heat collector plate. However, because it is a split type, there is heat loss in the process of heat conduction and heat exchange, and its thermal efficiency is not high, if you use water every day, it can rarely reach 60 degrees.