Who has a light steel keel wall broken surface diagram, and the ceiling, as well as the toilet, how

I don't have drawings, but I can tell you the main points, the derrick gap of the light steel keel changes according to the different ceiling materials, generally 30-60 grids, according to the weight of the material can also be two gears of a unit or cross to do the lifting rod, the surrounding wall to do the horizontal line, the underground septic tank you will not do yourself, find a professional team, along the water, exhaust, between the pool connection, water outlet, etc., according to the height of the drainage ditch to do a good step drainage, glass wall base to do 20-30 platform baseboard, or wooden or marble or brick concrete, The top is reinforced with woodworking boards to make the lower convex groove, the point is made structural, and the force is not affected on the ceiling, and the two sides of the top glass are sandwiched back with the ready-made lines or self-made lines sold, (one side is done first.) The same hereinafter).

The urinal should be selected first, there are wall-mounted type, floor-to-ceiling type, the spacing between the outlet and the wall is different (ranging from 7-12), the selection is done accurately, the wall is 40-45 high, and the water is hung up with a trap or other direct adjustments, the tap water flush valve is 110-120 high, and it can also be adjusted when the time comes, the similarity of infrared induction, mainly the water outlet, the water pipe must be considered when the fashion urinal will not hit it, this experienced hydropower will do.

If you make glass, only say that glass is connected to the ceiling, it is best to have a blockboard ceiling or gypsum board ceiling, which can be directly fixed by screws or glass glue. Safe and convenient.

The glass is connected to the ground, half of which falls straight to the ground, and then the glass is glued to the edge