-
Anonymous users2024-01-24If it is not a lighting roof, replace it with a thin mirror stainless steel plate and stick it to the firmly installed five-centimeter board.
If you don't want the effect of mirror brightness, you can paste the light film, and the range of color patterns is very large.
To do the glass lighting roof, there should be heat dissipation space on it, the ceiling keel must have enough strength, the glass 1 meter * 3 meters is too large, the proportion is not good, easy to break, it is recommended to divide into three pieces, respectively, the four corners of the hole drilling with advertising screws fixed.
-
Anonymous users2024-01-233 square is not very big, the ceiling, very simple, a little firmer, the general top burst screw bearing is very large, glass you are too thin is not good, the scale of their own, the main firm, I think the beauty on the line, reiterate (the bearing capacity of the top burst screw is very large).
It may have been reserved for residents to install sockets or switches! Because there are more electrical appliances to be used in restaurants, such as electric hot pot and so on.
Your solution is very good, it can solve the problem of toilet odor, and it is not technically complicated, I hope you give this idea to the toilet manufacturer feedback, to see if they can upgrade the toilet.
The other end is connected to somewhere.
Generally, the main place can be connected to a router, and then a secondary router can be connected from several exits. >>>More
This question is really more technical, because the market price of timber is different in different places. It's better to take a look at it and shop around for nothing.
You need to have AutoCAD drawings before you can place models, set up materials, lighting, renders, etc. in 3ds Max to complete the bathroom and kitchen design work.