I am anxious to ask my open air balcony to be tiled, and I found that there is water seepage, and I

To do waterproof treatment, it is to paste the cloth and then brush the waterproof paint.

Ceramic tile introduction: ceramic tile is a kind of acid and alkali resistant porcelain or stone building or decorative material formed by grinding, mixing, pressing, glazing and sintering of refractory metal oxides and semi-metal oxides, which is generally called ceramic tile. Its raw material is mostly made of clay, quartz sand and so on.

Historical development: The history of ceramic tiles can be traced back to 4000 BC, when the Egyptians began to decorate various types of houses with whispering banquet tiles. Clay bricks are dried in the sun or baked and then colored with a blue glaze extracted from copper.

Tiles were also found in Mesopotamia before 4000 BC. The tiles were decorated with blue and white stripes, and later appeared in a variety of styles and colors. China is the center of the art of Tao Qi silver porcelain, and as early as the Shang and Yin periods (1523-1028 BC), China produced a fine white stoneware that was whitewashed using early Chinese glazes.

Classification introduction:1According to the use: exterior wall bricks, interior wall tiles, floor tiles, square tiles.

2.According to the molding points: dry pressed bricks, extruded bricks, moldable bricks.

3.Burning ingredients: oxidizing tiles, reducing tiles.

4.According to the glaze points: glazed tiles, unglazed tiles.

5.According to the water absorption: porcelain tiles, stoneware tiles, fine stoneware bricks, stoneware bricks, ceramic bricks.

The open-air balcony is exposed to the wind and sun, and now the waterproof treatment is to paste the cloth and then brush the waterproof coating, generally to test the water for two days, and then make cement mortar and tile paste.

Your home is an open-air balcony, you could have wiped off the glaze of the whole brick, and penetrated into the whole brick with a strong sealant, which has achieved the purpose of water rejection, similar to the principle of open paint for wood, but you are outdoor, the oxidation of organic matter by ultraviolet rays is very fast, and the sealant is used in the indoor cement self-leveling, and it will soon age and lose its effect when it is outdoors.

Therefore, it is impossible not to knock on the bricks, waterproofing should be done at the base layer to do the effect is good, and even if you want to do waterproofing on the tile, you have to polish the original tile, otherwise the bite force of the new tile and the old tile is very small, and the thermal expansion and contraction are extremely easy to crack.

Find those professional leaks, they have asphalt heated and poured into the floor tile joints, or glue can also be used, you are the floor tile gap leakage.

If you have already pasted the tiles, you can't use asphalt, use the plugging king, the effect of my home is quite good.

Waterproof, but I think if you want to solve the problem fundamentally, I still knock on it and redo it waterproof.