-
Anonymous users2024-01-24Regular merchants who make on-site customized furniture will generally come to measure at least twice. First, when the house is completed, measure it once, and show the preliminary cabinet drawings to the homeowner, and the two parties communicate and revise until it is finalized. Then after the decoration project such as the wall and ground is basically completed, come to the site for a review, and then adjust the size and place an order for the workshop to produce.
There are mainly methods and projection methods in the measurement of custom wardrobes, so do you know how to operate and execute them? How to determine the calculated area of the custom wardrobe? If you want to buy a custom wardrobe, of course, the above questions can't be sloppy. >>>More
There are professionals who come to measure at home, about twice, and the data measured after the wall painting is completed is the final version.
According to the different location or function of the wardrobe, you can determine the time of door-to-door re-ruler and accurate measurement, if your wardrobe is leaning against the wall or do not plan to move the position in the future, such as the cloakroom, after the ground cement leveling can ask the manufacturer to measure; If your wardrobe is one side against the wall or to move the position in the future, such as bookcases, shoe cabinets, TV cabinets, etc., it is best to ask the manufacturer to measure after the floor or floor tiles are paved, however, please rest assured, the general complex selection and confirmation of the cabinet pattern of the steps have been completed, there will be no delay in time, the general manufacturer's custom cycle is about 10 days, and it can be used directly after installation, it will not delay everyone's check-in time.
Measured in two parts. The first time is when the water circuit is transformed, the initial test is carried out to determine the cabinet type and cabinet distribution, so as to avoid blocking important points; The second time is that the wall base is treated, the premise is to determine the height of the finished surface of the ground, and measure it carefully to ensure that the seams are tightly fitted. This content is provided by Renovation CBD.
Since it is custom-made furniture, how can it reflect the personality of customization without size, so it needs to have various parameters before production.