The furniture is covered with paint, and what can be washed with it

This depends on what material is dyed, and the following is the solution after the furniture is dyed with paint, for your reference. The paint drips on the furniture and can be wiped off with a cloth with wax water or gently wiped with steel wool dipped in wax oil. If the paint has dried, you can drip linseed oil on the paint to deteriorate, then wipe it off with a cloth, and then polish it with limestone and wax oil.

After a small piece of paint peels off on the surface of varnish furniture, it can be coated with advertising pigments of the same color, and then painted on the surface with varnish, that is, it is intact. First, the burned wood is removed with a blade, then wiped clean with steel wool, then filled with bakelite for repairing furniture, smoothed with oil, and then polished with furniture wax. If the drawer is worn, you can pull the drawer out and turn it over, and use an electric soldering iron to iron the candle oil on the drawer channel to make the oil seep into the wood.

Use the same method to iron candle oil on the corresponding channel of the table and cabinet to reduce the wear and tear of the drawers. You can use gauze dipped in a little sewing machine oil to wipe the rust clean, expose the rust and then use No. 1 fine water sandpaper to wipe off the rust, use gauze to wipe the rust and oil stains, and then mix the paint and turpentine in a ratio of 2:3 and evenly apply it to the rust.

The paint drips on the furniture and can be wiped off with a cloth with wax water or gently wiped with steel wool dipped in wax oil. If the paint has dried, you can drip linseed oil on the paint to deteriorate, then wipe it off with a cloth, and then polish it with limestone and wax oil. After a small piece of paint peels off on the surface of varnish furniture, it can be coated with advertising pigments of the same color, and then painted on the surface with varnish, that is, it is intact.

First, the burned wood is removed with a blade, then wiped clean with steel wool, then filled with bakelite for repairing furniture, smoothed with oil, and then polished with furniture wax. If the drawer is worn, you can pull the drawer out and turn it over, and use an electric soldering iron to iron the candle oil on the drawer channel to make the oil seep into the wood. Use the same method to iron candle oil on the corresponding channel of the table and cabinet to reduce the wear and tear of the drawers.

You can use gauze dipped in a little sewing oil to wipe the rust clean, expose the rust and then use No. 1 fine water sandpaper to wipe off the rust, use gauze to wipe the rust and oil stains, and then use 2?3. Mix the paint with turpentine in 3 proportions and evenly apply it to the corroded area.

Prepare two rags and banana water first, one dry and one moist. I wipe the stained area with a dry rag dipped in banana water and scrub it repeatedly with a damp rag. Pay attention to the area where the banana water is stained and be scrubbed repeatedly. The speed should be fast, and the banana water is easy to dissolve the paint surface.