How to install an under hung toilet?

Top press water tank: according to the thickness of the decorative layer Xcm, from the top of the bracket to the bottom of the bracket adjustable foot is 82cm Xcm. The bracket adjustment leg is only allowed to be adjusted to a maximum of 20cm without special lengthening.

The bracket of the water tank should be fixed with 4 screws, two on the bracket and two on the support feet. When installing, it is necessary to ensure that the surface of the water tank bracket is horizontal and the façade is vertical. If the concealed water tank is installed at the original pit location, the short pipe connecting the water tank and the drainage pipe must be greater than 90 to prevent blockage.

Wall-mounted toilet price Wall-hung toilets belong to the modern era.

High-tech goods, is the most common toilet in European countries. It is necessary to install a set of hidden water tank in the wall to support the hanging flush. The wall-hung styles are provided by the national standard designer for samples, and the domestic redevelopment mold is produced, the quality requirements are extremely high, the domestic application rate is small, and the production cost is high, so the cost is much more expensive than the traditional toilet.

Such a set of wall-hung toilets (first-line brands) and shaded water tanks that combine many advantages are quoted at about 2000-4000 yuan. It is advocated that the installation should be carried out by professionals, including door-to-door service, and the cost is about 250-300 yuan.

So how to install the wall toilet? First of all, according to the planning of the bathroom at home, determine the location of the wall toilet installation, and then get the drain pipe. The installation process of all shaded tanks is relatively simple, and the whole process can be completed in about 6 hours.

However, it is still advocated to be operated by professional and technical personnel, and the cost is not expensive, less than 400 yuan. The installation service is door-to-door, including three times: the first time to see that the installation conditions of the bathroom do not meet, if it does, find the direction of the blow molding water pipe device, and explain how to arrange the pipe; The second door-to-door delivery and installation of the water tank and sewer pipe; The third time I came to the door was to install a wall-mounted toilet when the overall decoration was almost over.

In addition, because the water tank of the wall toilet is hidden in the wall, the information of the water tank, technology and internal equipment are particularly important. Whether it is high-density polyethylene or whether it is one-time blow molding, which directly determines the service life of the water tank. The unqualified water tank will often leak, and it is also necessary to install high-quality water inlet valves and drain valves, otherwise the original intention of installing a hidden water tank will become a hidden type of trouble, so it is still recommended that we choose big brands and products with a good reputation.

1. Before choosing a toilet on the market, first determine the size of the water in the seat (i.e., the distance from wall to wall). Before installation, please make sure that the product accessories you choose, completed, please carefully review this manual and learn about some products.

2. Determine the height of the drain according to the condition of the toilet and cut off the rest of the part. The goal is to make the plumbing and toilet bottom more consistent. Start by using a hacksaw or cornea for the sewer according to the horizontal height of the centimeter, because the flange of the toilet bowl is soft.

If it is not centimeters high, there may be water seepage problems, and centimeters are more tightly fitted.

3. Measure the pit distance. Before choosing a toilet, first determine the size of the water inside the house, that is, the distance from the wall to the water. When using a toilet, if you want to decorate the tiles, you must measure the pit distance after applying the tiles. Otherwise, the toilet will be bought back and cannot be installed.

4. Install the flange ring provided with the toilet at the drain. Remember to press hard to ensure the compaction of the flange ring and toilet drain. Place the flange on the toilet drain.

Then carefully align the lower hose and lower it smoothly. At this point, the wall of the sewer pipe is inserted into the viscous clay of the flange for sealing.

5. After the water test is completed, start to install the cover.

6. Glue around the toilet, this step is also very important, not only to stabilize the toilet, but also to prevent the smell of the net from being released from the toilet. Therefore, we will not only fight, but also four whole weeks. At the intersection of the toilet bowl and the outer surface of the floor, since the toilet bowl and the floor are not one, a joint seal transparent sealant can be used for agitation, and the outer opening of the toilet bowl is sealed to maintain the integrity of the floor.

Some bathroom water can clog around the toilet bowl. NOTE: IF YOU NEED TO INSTALL THE SET SCREWS, FIRST APPLY A SPECIAL SEALANT INSTALLED IN THE TOILET BOWL EVENLY ON THE OUTSIDE 2CM OF THE TOILET BASE.

The drain of the toilet bowl should be pulled towards the center of the drain. Expansion bolts are located on the left and right sides of the toilet, remove the toilet, punch holes and raised bolts.

7. Install or debug the water tank accessories.

8. After installing the toilet, wait until the glass glue (putty) or cement mortar has solidified before releasing water. The curing time is usually 24 hours.

Before decoration, it is necessary to reserve a place for the water tank, and the wall where the water tank is installed generally has a maintenance opening. Compared to floor-standing toilets, it is more space-saving, and the bottom is easy to clean without touching the floor. In addition, the wall-mounted toilet is matched with the concealed water tank, which can change the position of the toilet in the bathroom, making the use of space more reasonable.

The manufacturer will be able to install it, and if you buy this toilet, they will install it in a package.