-
Anonymous users2024-01-24It can be understood as 1 linear meter and 1 meter. The linear meter refers to a special term and is also a unit of measurement. 1. Yanmi, as the name suggests, is an extension meter, which is more commonly used in the products of kitchen cabinet manufacturers.
Because in addition to kitchen cabinets, general furniture is not sold by rice, and is often sold in sets and pieces. It includes a one-meter-long worktop and a one-meter-long wall cabinet, although you can see the price of the upper and lower parts separately, but usually the manufacturer tells you the price of a linear meter, which is included in the upper and lower parts. If you only want a worktop, you can order a single workstation, and it's all possible.
If the kitchen is wide enough, Jiuzheng Home Network recommends that you make a set of cabinets. At the same time, make a slightly narrower set of consoles on the other side to place the microwave oven and rice bowl, which will be very convenient to use.
-
Anonymous users2024-01-231. Measure the distance from the left side of the window to the left wall 2, measure the distance from the right side of the window to the right wall or column 3, measure the height of the window 4, measure the height of the window sill from the ground 5, and measure the height of the floor.
The process of cabinet measurement:
1. Measure the distance from the left side of the window to the left wall; >>>More
Kitchen cabinets are basically like this, these places are to be cut corners, if you do it, the cabinet is relatively not so firm, this space looks not small, and its utility is not large.
The pre-quotation is before the change of water and electricity, that is, when the blank house can be measured and quoted; >>>More
First set the datum, take one side as the benchmark, and then radiate the lines (size) to the rest of the surface, if it is a cabinet countertop, it is recommended to measure after paving the floor tiles, because no matter how oblique the wall is, the floor tiles are still positive after paving, it is easy to find the datum, and measure each point on the ground. There is no need to be a case, because every special-shaped kitchen is different.
There are mainly methods and projection methods in the measurement of custom wardrobes, so do you know how to operate and execute them? How to determine the calculated area of the custom wardrobe? If you want to buy a custom wardrobe, of course, the above questions can't be sloppy. >>>More