In the end, how to deal with the waterproofing of your bathroom, mine is the bathroom water seepage,

Updated on Bathroom 2024-06-23
4 answers
  1. Anonymous users2024-01-24

    Wouldn't it be enough to do a closed water experiment?

  2. Anonymous users2024-01-23

    JCDecaux Flexible K11 Waterproof Slurry (Advanced Home Waterproof) Series is flexible and can cover cracks no more than 2mm.

    It has good weather resistance.

    Environmentally friendly and non-toxic.

    It can be applied in a humid environment.

    It can resist the attack of carbonate and chloride ions.

    Scope of application: Solid substrates composed of concrete, brick masonry, pre-casting, lightweight bricks, etc.;

    Walls and floors of indoor and outdoor buildings, such as tunnels, bridges, basements, kitchens, balconies, toilets, swimming pools, reservoirs, etc.;

    Sealing of precast joints, post-pouring belt interfaces, structural expansion joints, perimeter of the nozzle, lightweight, loose and porous masonry (must be reinforced with carcass);

    Local reinforcement treatment, such as around the nozzle, corners and other parts.

    Specification: 12KG

    Color: Gray.

  3. Anonymous users2024-01-22

    Now the bathroom has seeped water, and there are problems with waterproofing, so it is best to knock it all on and redo it and find a decoration company.

  4. Anonymous users2024-01-21

    Plug the nozzle, fill the ground with water, wait a day to see if there is less water, less means that it has not been done, and a slight leakage means that the waterproof has been done and destroyed.

Related questions
4 answers2024-06-23

It is recommended that you use polypropylene cloth to do a good job of the bathroom floor and wall together to solve the problem of wall leakage in the future.

4 answers2024-06-23

1. Inspect and accept the appearance, variety, specification, packaging, size and quantity of materials, and form corresponding acceptance records. >>>More

2 answers2024-06-23

If there is not much water, you can sprinkle some dry cement, which is very convenient for construction and has a protective effect on waterproofing.

4 answers2024-06-23

Cover it with an open wire pipe, because the tile is porcelain white, and the open wire pipe is also white, there is no color difference, the open wire pipe is square, you can choose how big the open wire pipe is according to the number of wires, the open wire pipe can be fixed along the corner of the wall, the general hardware store of the open wire pipe is more, economical and convenient, the method of installing the open wire pipe, use a few points of glue on both sides, and put transparent glass glue between the points, and press the open wire pipe in the position you want to install.

3 answers2024-06-23

Causes of resurgence of moisture in the bathroom.

1. The waterproofing of the bathroom is not done well. >>>More