-
Anonymous users2024-01-241 There is no way to do it, there is no way to change the sewer, Chinese buildings are generally downstairs, and the downstairs will definitely not agree to go. And the bathroom only has a toilet and a sewer pipe? It's impossible to put it, there should be 1-2 floor drains and hand basins to drain ah, find a developer to solve it.
The best way is to leave it dry for 24 hours, but if it's already flushed, don't worry too much, and if there is no leakage or smell for the past two days, there will be no problem.
It is necessary to adjust the height of the inlet valve to adjust the water level >>>More
The sewer pipe of the flush toilet is generally a PVC110 pipe, you go to find a section of this pipe to break, according to the size of the hole to see a piece, of course, it is larger than the hole, brush on the PVC glue and stick it directly, tie it with a rope, and then use transparent glue to stick around a few circles to prevent touching.
The cooling load of the living room is 150W per square meter, one horse is about equal to 2324W, 34 square meters need about two horses, the room temperature of the horse can be reduced to about 28 degrees, but it will continue to pre-rotate, and the requirements are not high, and it is also very cool.
Your family's washing face and toilet share a drain, and you can take the original drain when you sit on the toilet. In fact, it is very simple, go to the building materials market to see your favorite toilet. Tell the merchant about the current situation of your bathroom, ask him to come up with the installation plan, and ask him to bring his own materials to install it. >>>More