-
Anonymous users2024-01-24The previous time I tightened the bulb, it caused a short circuit, and the switch contact was burned firmly and could not be opened, so try to change the switch.
-
Anonymous users2024-01-23Balcony lights and kitchen lights are not together. It's very likely that the problem is there, just turn on the switch first and see if you can't get it. The first time you install the light, it trips, or it may be that there is a problem with the light itself, or your live line zero line and the wall have touched. No further problems.
-
Anonymous users2024-01-22Use the electric detector to measure the live wire, remove the live wire, and then connect the fire wire to the lamp holder through the switch control line, and then the switch can control the bulb.
-
Anonymous users2024-01-21The switch is burned, just change the switch! Put down the electric switch and change it, and stay safe!
-
Anonymous users2024-01-20If the switch is broken, you can change it to a dual-control switch.
-
Anonymous users2024-01-19They were right, the contact of the bulb bar that exploded in front of it burned and couldn't be opened, and it was estimated that the switch was broken.
-
Anonymous users2024-01-18It must be a short circuit in the wires, right?
The official name of the tee to which the blue ring belongs is the PVC silencing riser inspection port. The muffler pipe is a two-layer structure, which overcomes the problem of high noise. >>>More
After reading the picture of the landlord and the explanation, I was really drunk. Seriously, I really don't understand. You don't know if your own pipes are hot water pipes or cold water pipes? >>>More
Hello. I can only tell you two ways to solve problems like yours, use your hands if you want to go out quickly. If you're afraid of nausea, wait for someone.
A normal mouth of water is the mouth of the sewer pipe, and the other mouth is generally sealed. You can find a similar rubber plug to plug the unused mouth and seal it with a lot of glass glue. After the glue is dry, put on the poke, and seal the gap between the toilet bowl and the ground with glass glue or white cement.
Go to the hardware market to buy a check valve, about 8 yuan installed in the position of the air outlet, the exhaust pipe is connected to the top can solve the problem of pouring fumes.