-
Anonymous users2024-01-24The light bulb burned.
There was a short circuit in this process, and the air switch at home tripped to protect itself.
Turn off the electric switch, unscrew the bad bulb, turn on the electric switch, see if it is short and trip, if you don't jump to change the bulb, if you still jump, you need to ask an electrician to check the circuit.
-
Anonymous users2024-01-23The bulb is short-circuited. Eliminate the problem first and then power on and close. Check the lower wiring for scorching and replace the bulb.
-
Anonymous users2024-01-22Short circuit, the electrician may not be connected well when he connects the wire, and there is a short circuit caused by poor contact.
The power of the gate knife is small, or the line is damaged and wet when there is a slight short circuit, change the power of the gate knife, if it is still tripped, check the line, first solve one of the routes, practical such as tripping means that the route is no problem, continue to solve another route practical, so that you can find the problem of the line,
Find out if it's always off or if it's often off. If it is sometimes bright and sometimes not, it is estimated that the copper sheet of the lamp holder or the binding post is not in good contact. If you are inexperienced, don't do it yourself, find someone who understands to check it. After all, electrical work is dangerous.
One is to check whether the seal connected to the bulb glass and the lamp mouth is aged and separated, and the other is to check whether the lamp port is loose. Because bath bomb lamps generate high temperatures when used and are easy to age, they should be checked regularly.
The first is that the bulb is broken. The second is that someone in the family fiddles with electrical appliances and causes a short circuit. There is also a power outage and maintenance of the power supply bureau.
Generally, there are two reasons for water leakage in the bathroom, one is water seepage on the ground, and the other is water seepage caused by broken water pipes. The manifestation of this situation is that the leakage is continuous and uninterrupted, and sometimes the leakage amount is constantly increasing, such as closing the main valve of the water reform balance, and the leakage will be reduced immediately. First of all, the nuclear inspection team observes the leakage and makes a record, and then turns on all the faucets, toilets and drains the water multiple times, and pours water into the leakage.