How to make a sofa cover

If you know how to cut it yourself, it's actually similar to making clothes, tailor-made. I won't look for a manufacturer, so I will go straight to it. Attached [sofa cover fabric type.

I hope it will help you!

Just come by the size, I won't ask Du Niang.

If you want to DIY, you can measure the size of the sofa: length, width and height, and then start to compare the size on the cloth. There is also a way to buy a large piece of non-woven fabric, it seems to be 10 yuan a meter, buy a 2 meters there are almost 3 square meters (non-woven fabric is a fixed width meter), in that case, you will put the non-woven fabric on the sofa to compare the position, use a pen to make a mark, and then take down the cloth and use a stapler to simply fix the creases, the simple sofa cover is done, and then put it on the sofa to see if it fits, until it is suitable and then buy the fabric you like to make a real sofa cover :)

If you are making sofas, for development, or hire people to do it, if the factory is larger, you can find a sewing manufacturer!

3 allMaterial: 1.High-density cotton canvas 10 meters (I don't know how to count, buy more), this kind of cloth must be washed first when you buy it, because it will shrink.

2.A cotton rope with a diameter of about 5 mm makes a tooth 3There is also a velvet zipper called a hook and loop (I bought a roll).

Cut Production: I use the most stupid method, divided into parts to make, the backrest, cushion, and the back are separate, not only convenient for the disassembly of the set, but also easy to clean, the two parts need to be connected where the woolen zipper is used, also called the hook and loop.

Take the backrest as an example, first measure the size of the part to be made, the front. Side. Top.

Bottom. The length and width of the back, plus 1 inch after cutting, both sides to remove the seam size is basically almost suitable, there are inappropriate places to change at any time, especially the corners of the curvature of the place, I almost have reworked, is quite stupid, hehe

Something to look out for: It is necessary to let a little more when cutting, and it is easy to rework and change the sewing parts, of course, this is the first time for me like this"Do engineering"For people who have learned clothing tailoring, it is a piece of cake. This is a strip of cloth for making teeth, cut into more than 1 inch wide, I have left a lot, and the actual 1 inch is enough.

Taobao is simpler, and you really need to use a thick cloth.