The panels of the suspended ceiling are generally thick

Aluminum gusset ceilings and integrated ceilings are actually enough! Absolutely no problem! Many brands have made the ceiling, but in fact, it only increases the thickness of the film. The thickness of the aluminum sheet has not changed. However, with today's industry market, it is recommended that you still use a suspended ceiling.

The board of the book is uneven, and the board that is too thick has a bad effect after installation, and the seam is large. Generally, the thickness of the board is selected.

The thickness of the ceiling is visually inspected, and the ceiling for home decoration is generally a few wires on the left and right, and the project is an international standard. The aluminum-magnesium plate is too thick, and other cheap iron impurities must be added. Aluminum-magnesium plate, in addition to aluminum, integrated ceiling-aluminum plate will make the plate tough, but the cost of magnesium is much higher than the aluminum itself, and the merchant will definitely not add more magnesium in order to thicken the plate, only by adding iron, which is a cheap iron to make money, which is bound to affect the flexibility of the plate; If it is less than that, it will cause the hardness of the plate to be not enough, and the aluminum plate that is too thin, if it is a piece of paper, cannot bear the load.

In this way, it will be a very difficult project when dismantling and cleaning work is carried out in the future. If you are not careful, the plate will deform and lose its function during the removal process. Really good plates, you can do a small test, hold a corner of the plate, and then shake it a few times to see if the plate is deformed.

Gypsum board is generally used for ceiling board, and gypsum board is now the most commonly used thickness on the market, which is generally less than 9 thick, and yes, it is recommended to choose a better brand.

There is no national standard for the thickness of aluminum gusset ceilings, only industry standards. In fact, as long as the aluminum is good, there is no problem (for example, the imported Lexlong is the standard material is quite good).

The domestic slightly better ones are: Osbao Huashilong Xifei Their board is very good, I personally went to the card, and it can indeed be guaranteed in the above. The surface treatment process is also really good.

Due to the current integrated ceiling market competition, what sales methods can be figured out by merchants, so if you buy a brand that you are not sure of whether it is good or not, and you are not sure about the quality, it is best to buy the board! Take a 1000 caliper yourself and measure it on site!

Are you talking about an integrated ceiling or a plasterboard ceiling?

The thickness of the panels in the integrated ceiling is different for each household. Because the materials used are also different.

See what you need to come.

The thickness of the gypsum board ceiling is determined according to the shape. The thickness of the gypsum board itself is fixed, and the thickness is determined by the length of the keel.

Standard laminated sheets.

Roll-coated sheet, anodized sheet.

The thicker the plate, the more hands and feet will be made.

I suggest you go to the Happy Renovation Real Estate Community for consultation.

Kiss! Hello, happy to answer your <>

How thick are the panels of pro-suspended ceilings in general? As follows: 1. The thickness is usually 8 mm, mm or 9 mm, and there is a kind of gypsum board thickness that can reach millimeters, and the thicker ones can reach more than 10 millimeters, about 12 millimeters.

2. When consumers choose gypsum board materials, they are not as thick as possible, but also choose in combination with the size of the indoor space. If the height of the layer is low, in this case the choice of drywall is not too thick, choose between 8 and 9 mm. If the layer height is relatively large, the choice of plasterboard can be between 10 and 12 mm.

The thicker the drywall, the stronger the sound insulation it has. In short, try to choose some big brands when choosing materials, whether it is its strength, heat insulation, and thermal insulation performance, which are very prominent. Why is there a crack in the gypsum board ceiling material 1, using gypsum board as the material of the ceiling, because the quality itself is relatively light, plus it is easy to do modeling, it is also the most widely used ceiling method for home decoration, but why does there still be the problem of cracking?

2. The first thing to consider is whether the whole gypsum board is not used, if it is not a whole sheet, spliced with other materials, the handover place is the most prone to cracking. When installing, it is necessary to ensure that the keel is stable enough, but if the flatness does not meet the requirements and the structure is unstable, it will lead to a decrease in the fit, which will be deformed, and it will gradually crack in the later stage. If you want to solve it, gypsum board can be integrated from the bottom of the beam, that is to say, the beam can be wrapped inside the ceiling, I hope mine can help you <>

Do you have any other questions?