The restaurant hood is getting something

Updated on Restaurant 2024-06-22
3 answers
  1. Anonymous users2024-01-24

    3. All this problem suggests that you should not use this range hood until the problem is solved. If you fall into something that is not taken out before, there are several possible causes.

    The first point. There is a possibility that the hat will be caused after it is entered. The fan blades are damaged. If the fan blades are damaged, the machine will crackle when it is turned on. This will cause you to spend your own money to replace the damaged parts, and secondly, if the cap sucked in may be soft or disposable plastic, it may cause a flue blockage. Because the inside of the range hood is all oily and sticky. Plastic hats are easy to fit on.

    Causing blockage of the flue. However, when the range hood is running, it will cause the smoke to not be able to smoke.

    The third point. If the hat you suck in is made of plastic, it is possible that it will not be affected when you use it. It's possible that this hat will be attached to the wires inside.

    In the process of using, when the inside is hot, it will cause your plastic hat to catch fire. If the hat catches fire, it will cause the wires to burn together. The consequences are severe.

    Because the inside of the range hood is all sticky, it is easy to catch fire.

    Based on the above reasons, it is recommended that you do not take the hat out before repairing it. Don't use a range hood just yet. Avoid some unnecessary hassles. There are two ways you can solve this problem.

    The first way is to call the official customer service directly to report for repair, and then your local after-sales service will take the initiative to contact you, and then the after-sales master will come to solve the problem you need to solve. If it is within the warranty period, it is also charged, and if the warranty period is over, it is even more charged, because it is not a problem of its own quality, but a problem of your artificial use.

    The second way is to directly find an after-sales master or maintenance master who is more familiar with you, and you need an experienced master. It is necessary to know the root of this master. Avoid having your own interests violated.

    If you can't solve this problem yourself, it is recommended to use one of the above two methods.

  2. Anonymous users2024-01-23

    It is best to take it out as soon as possible, otherwise it may affect the normal use of the range hood in the future!

  3. Anonymous users2024-01-22

    In fact, it must be removed and taken out manually.

Related questions
8 answers2024-06-22

Let's start with white vinegar. It's a must-have condiment in the kitchenBut in addition to seasoning, it also has a cleaning function, we can mix white vinegar and dish soap If the stain is heavier, the concentration is a little higher, no need to put water, and then the brush is directly dipped to brush, the effect will be very obvious; If the degree of stain of the hood is low, you don't need dish soap, just mix it with two spoons of white vinegar and a little warm water, and then use a brush dipped in warm vinegar water to clean it, the effect is also very obvious. The principle is that white vinegar can soften oil stains, and dish soap can melt away oil stains, and the combination of these two will have a magical effect. >>>More

11 answers2024-06-22

Ingredients required: baking soda, white wine, water, chopsticks, watering can, scouring pad. >>>More

4 answers2024-06-22

Kerosene smoke smell When cooking with kerosene stove or honeycomb coal, during the combustion process, black smoke is produced, and if a few drops of vinegar are added to kerosene or honeycomb coal, the smoke smell can be reduced or eliminated. >>>More

1 answers2024-06-22

The 38-year-old famous range hood, the old brand is cost-effective, worth having, trustworthy, and worth buying.

1 answers2024-06-22

In the exhaust fume system, some parts are easy to disassemble and reachable, such as fume hoods, filters, fans. These components are usually cleaned by hot pressing (> 120 bar) in combination with a special chemical detergent (pH>14). Others that are not easy to reach and cannot be disassembled, such as vertical and vertical pipelines, require special equipment and methods; >>>More