-
Anonymous users2024-01-24It can be installed in the kitchen or bathroom.
If it is a hot air water heater, it is safer to install it in the kitchen.
The hose is made of hot and cold water pipes, and the angle valve is made of all copper.
-
Anonymous users2024-01-231. If you use a gas water heater, if the kitchen and bathroom are far away, it seems difficult to install it in the bathroom, and it can only be installed in the kitchen, because the gas pipe is not allowed to be installed indoors, unless the gas company is willing to connect the gas pipe for you outdoors. If it is an electric water heater or air energy water heater, it is recommended to install it in the bathroom, because of the large water consumption, and the pipeline is short, the heat loss is less, the kitchen can be installed with an instantaneous electric water heater, but the wire can be embedded enough Oh, or install another gas water heater, of course, hot water can also be drawn from the bathroom to the kitchen, but the heat is lost. I'm speaking from experience.
2. It is recommended to purchase national excellent brand-name products for water heater hoses and angle valves. Such as Rifeng, Jinde pipe, hot and cold water pipes are purchased separately, Brilliant, Shenluda, Wrigley copper angle valves and the like. The appearance is beautiful, the craftsmanship is exquisite, and the quality is guaranteed.
-
Anonymous users2024-01-22As long as the exhaust mode of the gas water heater is not balanced (i.e., double smoke pipe; One layer of exhaust, one layer of air intake) cannot be installed in the bathroom, it must be installed in the kitchen. From the perspective of the trachea, it is safer to install in the kitchen and balcony... For high-pressure hoses, corrugated stainless steel is better, this kind of high-pressure pipe has a large inner diameter, and the joint does not accumulate scale.
Try not to use snakeskin hose for a long time, there will be a lot of limescale at the joint, which will block the pipe... The angle valve must be bought, and the poor quality will be broken in it when it is replaced for a long time, and the good quality can be reflected from the weight.
-
Anonymous users2024-01-21If you use a gas water heater to install a kitchen, if you use a water heater to install a bathroom, installing a kitchen will cause hot water to be used in winter, and the cold water in the water pipe needs to be drained before the hot water is produced. It is more troublesome, it is recommended to install a small water treasure in the bathroom.
If there is hot water in the kitchen, the bathroom may be longer from the kitchen because the pipe, so when putting hot water, you must first release the cold water in the pipe, and then there will be hot water.
Gas water heaters.
Installed in the kitchen, far away from the bathroom, the solution: >>>More
This should not have anything to do with the water heater, it should be a problem with the installation of the water pipe, or the water pipe is small, the span is too long, there is a cold space in the middle, or the hot water pipe is not smooth, which may lead to this phenomenon. It is recommended to do a good job of insulating the hot water pipe, which may be better.
The mud and sand debris in the pipe is blocked by the water flushed into the shower, resulting in insufficient water flow, you first remove the shower and then light the fire to try it, if it can be ignited normally, clean the shower and then install it.
It is generally placed in the toilet and hung on the wall.