-
Anonymous users2024-01-24Go buy an accessory and change the part of the crank below, it's sold online! The lifting is unreliable, overwhelmed, and always bad.
-
Anonymous users2024-01-23I went to the Huaiyin hardware market to buy a hand-cranked one, thirty or forty yuan, and the asking price in this county was too high.
-
Anonymous users2024-01-221.Check whether the remote control battery is sufficient, and you can change the battery to give it a try.
2.If the remote control is fine, check whether the remote control and the host are not successful in matching the code, when the host is powered on, press the rising key with the remote control, if there is a long sound at this time, the code is successful.
3.Check whether the micro-moving switch is sensitive.
4.Check the circuit fuse of the motor and the whole machine to prevent it from being burned.
5.It is also possible that there is a problem with the upper and lower ends of the drying rack telescopic rack, you can check whether it can be retracted freely, if you still can't go up after trying the above steps, you need to contact professional personnel for maintenance.
-
Anonymous users2024-01-21Go buy an accessory and change the part of the lower crank.
The lifting balcony drying rack can only be lowered but not raised, how to repair it >>>More
Ceiling materials go to material decoration stores, all over the street, drying racks I want to get cloth in my heart, one or two hundred yuan.
The electric lifting type is more convenient, you can go to the local building materials market or home appliance market to see on the spot, or search for electric drying racks on the Internet. Compare more, after all, if you decorate it once, it will last a lifetime, of course, you have to buy a better one. >>>More
Drying racks are divided into several materials, there are 304 stainless steel, aluminum alloy, aluminum titanium alloy, if you need to be cost-effective, then choose stainless steel and aluminum alloy, high gear durability is good, choose aluminum titanium alloy, the thickness of the rod is thicker than stainless steel and aluminum alloy, the price is between more than one hundred to four or five hundred, and there are those who don't understand to find me.
Step 1: Install the top seat.
1. On the top of the balcony to be installed, take a steel ruler to measure the diameter of the lighting on the top of the balcony, and then draw an installation mark between 15 and 30 cm on both sides of the lamp (the length is determined according to the size of the balcony). Then measure the length of the mark and the edge of the balcony, and determine the width of the roof installation according to this distance. >>>More