-
Anonymous users2024-01-24Toilet waterproofing practices:
1. Ground treatment.
Be sure to level the ground before applying waterproofing. Screed construction method: if there are voids, cracks and unequal defects on the base surface, repair and smooth with cement mortar.
The base surface must be firm, flat, clean, free of dust, greasy, wax, release agent, etc., and other debris substances. The construction of the waterproof layer can only be carried out after the screed is dry, and the construction should be fireproof and waterproof during the construction. After the waterproof layer is completed, the finished product should be protected, and no one should walk around.
2. Wall treatment.
About 300mm high waterproof paint should be used for wall treatment to prevent water from penetrating the wall and returning moisture.
The painting height between the wall and the floor (plane and façade) of the bathroom should be greater than 100mm.
If there is a shower in the bathroom, the waterproof height of the room is not less than 1800mm.
If there is a bathtub, the waterproof height of the wall adjacent to the bathtub should be 300mm higher than the bathtub.
The waterproof height of the bathtub is not less than 800mm.
The waterproof height of the squatting pit should exceed the ground of the squatting platform by 400mm.
For the light wall of the bathroom renovation and the self-built light wall, it is recommended that the waterproof height should be at the top.
3. Do a closed water test.
After the waterproofing construction is completed, the water storage test is carried out. Block all the drains in the bathroom, build a water barrier about 200mm high at the door, and then pour about 20mm 30mm deep water into the bathroom, and check whether there is leakage on the surrounding walls and the ground after 24 hours, the waterproof experiment is the key to ensure the quality of the bathroom waterproof project, and it must be done. If there is no leakage after more than 24 hours, it is considered qualified.
If water leakage is found, the water storage test should be stopped immediately, the waterproof layer should be re-improved, and the water storage test should be carried out after the treatment is qualified.
If the bathroom needs to be coated with paint products, the wall base should not be used ordinary interior wall plastering, but should be used as the base of Zebi polymer cement putty. The product is recommended to use two-component water-based epoxy paint, which has tile-like hardness, smooth surface is easy to clean, and has excellent water resistance, such as the Divi water-based oil friend key treasure system. For decoration knowledge questions about paint, paint, paint, and waterproof coatings, please leave a message here in the decoration forum.
This should be analyzed on a case-by-case basis, and can not be generalized, and the decoration should not only play a beautiful and decorative role, but also try to be very practical. I recommend consulting with a designer from a decoration company who can help you solve this problem. You can also see what methods your neighbors use to adopt and absorb what they feel you are happy with.
1. Inspect and accept the appearance, variety, specification, packaging, size and quantity of materials, and form corresponding acceptance records. >>>More
Generally, the wall is brushed with waterproof mortar, and the surface of this waterproof brush is rough, which is convenient for tiling. There are bricks also depend on the size, if it is a large brick wall, you have to use tile adhesive to paste, normal cement sand can no longer meet the needs of tiles.
It can only be connected to the high-power exhaust fan alone, and the exhaust effect is not ideal, so change to a thicker exhaust pipe, the thinner the tube, the greater the resistance, and the thicker the resistance, the smaller the resistance. >>>More