Kitchen decoration, how to remove the original white putty ash?

Updated on Kitchen 2024-06-29
6 answers
  1. Anonymous users2024-01-24

    Before shoveling the wall, it is recommended to use a roller to dip the water in the wall and roll the wall several times, so that the wall absorbs water and gets wet, and then shovel after a while.

  2. Anonymous users2024-01-23

    Spray water on the white first, and then use an angle grinder with a wire brush to grind, which is very easy to do, but it is too dirty, so you must do a good job of protection.

  3. Anonymous users2024-01-22

    This can only be done little by little. To shave off the cement from scratch again without an electric hammer.

  4. Anonymous users2024-01-21

    Before shoveling the wall, it is recommended to roll the wall several times with a roller slippery water, so that the wall is soaked or wet, and then shovel after a while, the shovel blade is the one that can replace the art blade, which will be easier to remove.

  5. Anonymous users2024-01-20

    Spray the white with water first, and then use the orange after a while.

    Angle grinder. Bring.

    Wire brushes. Grinding, it's very easy to do, but it's too dirty and the lump is wide and collapsed, so you have to do a good job of protection.

  6. Anonymous users2024-01-19

    This can only be done little by little. To shave off the cement from scratch again without an electric hammer.

    Let's see what others have to say.

Related questions
1 answers2024-06-29

There are many reasons for tile cracking.

Mainly including improper construction, such as hollow drumming, poor quality of tiles, etc., will cause tile cracking, the specific cause needs to be determined in combination with the actual inspection of the site. >>>More

6 answers2024-06-29

Many people who like cold colors with their sleepy companions, in the case of decorating the house, will prefer the gray decoration style, in fact, the gray tone is well matched, which can improve the overall level of the house, so how about the high-end gray light luxury style? Let's take a look. >>>More

1 answers2024-06-29

If you want to apply tiles, you need to remove the gypsum and putty layers on the wall, shovel until the cement mortar plasters the wall is exposed, and then use cement mortar to brush the wall, and then pave the tiles. >>>More

2 answers2024-06-29

If not do-it-yourself. Maybe you'll have to get your thoughts out there first. If your imagination is too far beyond reality, you may not realize that you are limited by technology and materials.