Home fiber to the home, the optical modem was connected to a switch, and the switch went all the way

Updated on Living room 2024-06-02
1 answers
  1. Anonymous users2024-01-24

    Two methods, depending on your home wiring situation.

    1.The modem is configured to route mode, the dial-up function is executed, DHCP is enabled, and the two routes are connected to different ports of the switch, and the WAN ports are set to automatically obtain routes.

    2.The modem is connected to the bridge, the WAN port 1 of router is connected to the switch, the WAN port is set to dial-up, the 2WAN port of router is connected to the LAN port of Router 1, and the WAN port is set to automatically acquire. Do not set the IP addresses of the two routers to the same network segment.

Related questions
Is it appropriate to use fiber optic chandeliers in the living room
1 answers2024-06-02

Optical fiber lighting is used in star hotels, bars, nightclubs, KTV, discotheques, saunas, bathing centers, high-end entertainment venues and home decoration. >>>More

Can mahogany furniture be engraved with an optical fiber marking machine?
2 answers2024-06-02

Mahogany furniture can be engraved using a fiber optic marking machine. >>>More

My newly installed Unicom optical fiber installed the fiber optic cat and router in the living room,
1 answers2024-06-02

Buy a slightly better one, this thing will heat up after a long time, and the poor network is unstable or even dropped, so you can buy one for about 70 yuan. You can take a look at Jingdong as a reference.

My home is a fiber optic home, the living room on the first floor is equipped with a fiber optic cat
3 answers2024-06-02

If you want to go to the interface on the second floor, if you go to the living room (I mean the network cable of the cat on the first floor can be connected to the study through the network cable interface on the first floor) casually, the route can be placed in the living room or study.

Telecom fiber broadband, the optical cat was installed in the living room, and when it was installed
1 answers2024-06-02

If the optical fiber cable is not long enough, it will generally not be moved, and it is necessary to use an optical fiber fusion machine to lengthen the optical fiber line.