-
Anonymous users2024-01-24The reason for the cracking is caused by the shrinkage of the wood at the junction, if it cannot be redone, the caulking gypsum at the gap can only be cut out and processed again according to the steps. It may also crack after treatment. The best thing to do is to wait for a while while before the wood is thoroughly adapted to the humidity of the room.
Between the seams are filled with putty and brushed with latex paint.
Integrated plasterboard or traditional plasterboard? Traditionally, there are many problems, such as deformation, cracks, ash, etc., and the new integrated decorative gypsum board will not, easy to install, environmentally friendly, good-looking and diverse, Class A fireproof, etc.
The ceiling is made of gypsum board and keel, generally with wood keel and light steel keel. If you use wooden boards to make a suspended ceiling, because the wooden board is easy to deform, it will also cause the unevenness of the top surface, and it will be easy to change color after brushing latex paint on the wooden board. >>>More
The quality of drywall refers to the strength and flexibility. What determines the material (the amount of fiber in the gypsum material) plays a decisive role. If the quality is better, the strength is good, the toughness is not easy to break. The flatness of the ceiling is good and not easy to deform!
I have not heard of the plywood flat ceiling, according to our understanding, it should be: use the wooden square to play the grid and hang the plywood with an air gun, and then apply the veneer or veneer modeling, and finally paint.