-
Anonymous users2024-01-24Generally, the bathroom ceiling lamp has a card on both sides, which is stuck on the gusset, and the lampshade on the front is stuck up, and it will come down when you pull it down, and the lamp tube inside is also stuck on, and it can also be cut off. Don't be afraid, after unloading, you can put it on, it's very simple.
-
Anonymous users2024-01-23You find the model of the lamp and then go to Taobao, find the store that sells this model of lamp, consult with the seller, and generally tell you.
-
Anonymous users2024-01-22Loosen the cover, remove it with the shell, and then loosen it with the screws to change the light! (Pay attention to turn off the switch of the light!) ）
-
Anonymous users2024-01-21There are different ways to take various lights, and you need to understand the structure of your lamp first.
There should be a bayonet next to the lamp, and there should be two springs in the position of the bayonet, you have to press the springs and slowly remove the lampshade first. Then dismantle the lights.
You just buy the lamp and hand it over to the ceiling installer, but you may have to pay the shop worker for the purchased lamp. If you're buying a lamp for a suspended ceiling, then you don't have to think about it.
This kind of lamp spring is generally used to hang accessories. If there is a lamp, give a picture and help you!
According to the normal design concept, the light should be installed in the middle of the bathroom, and the bath bomb should be installed directly above the shower, but your home is a plastic gusset, and the bath bomb has been installed.
If you don't put it, you can find the keel. Yours should be the kitchen or bathroom, this ceiling light is very light, screwed. Use a screwdriver to pierce an empty hole in the position you want to install, and then shake around to find the keel. >>>More