TOTO toilet can t get water, I want to repair it myself but find that it can t be dismantled! There

First of all, it is necessary to make sure that the angle valve is open, and the angle valve of the TOTO toilet is generally special, and it should be turned counterclockwise with a flathead screwdriver. Step 2: Check whether the angle valve is open to water: unscrew the hose on the angle valve with a wrench and then open the angle valve to see if the water is out, if the water is out, then rule out the angle valve problem, to step 3:

There is a rubber ring in the connection area between the toilet and the hose, it may be that there is more garbage and blockage, you can remove it without using it, and then look at the problem in the water tank, open the water tank to see if the plastic cover that rises with the water level has fallen, and press it lightly with your fingers to see if there is any water coming in.

Such a problem will occur with such a large brand of TOTO toilet?

There is no after-sales, you can always find a plumber to decorate it, and it is incomprehensible here. It is estimated that the net is blocked, and it is thrown away, which cannot be said to be useless, but it is of little significance. There will be no problem with accessories, that's TOTO. Simple things.

Demolition must be able to be dismantled. Otherwise, the tank will not fit.

I am the toilet after-sales, first of all, to determine that there is water in the inlet pipe, and then to see whether the inlet valve touches the wall of the water tank to cause the water inlet float can not float, if the above reasons are ruled out, it may be that the conical filter at the connection between the inlet valve and the inlet pipe is blocked, unload to the hose, and pick out the filter to clean it.

Don't be superstitious about advertising, toto gets worse and worse.