-
Anonymous users2024-01-241. Several layers of varnish should be applied to the back of the door sleeve According to the relevant regulations of the state, all door sleeves that are in contact with the bathroom wall must be treated with moisture. Conventional moisture-proof treatment mainly includes the following aspects, and the owner may wish to keep an eye on the workers when decorating the house.
Clause. 1. The place where the blockboard of the door sleeve is in contact with the wall (that is, the back of the blockboard) must be painted with varnish, and it is best to brush a few more, so as to block the moisture transmitted from the wall to the door cover;
Clause. 2. If there is no threshold stone in the bathroom, then the door sleeve should be vacant from the ground for a distance, about 1cm, so as to block the water vapor that seeps into the door sleeve from the bathroom floor;
Clause. Third, it is to paste a layer of fireproof board on the back of the door panel, which can block the water vapor infiltrated into the door sleeve indoors;
Clause. Fourth, the door line on the side of the bathroom is selected with ceramic tiles and stones, which are beautiful in appearance and not afraid of water.
Experts suggest: There are two ways to solve this problem of Mr. Fang's house, one is to cover up mildew by brushing and mixing paint, which is a way to treat the symptoms but not the root cause; You can also replace the veneer, cut off the moldy woodworking board, and replace it with a new blockboard, which is more laborious, but it can cure the roots.
-
Anonymous users2024-01-23Bathroom door cover moldy solution:
1. Use the method of brushing and mixing paint to cover up mildew, 2. You can replace the veneer, cut off the moldy woodworking board, and replace it with a new blockboard.
Ways to prevent mold on door covers:
1. The place where the blockboard of the door sleeve is in contact with the wall (that is, the back of the blockboard) must be painted with varnish, and it is best to brush a few more, so as to block the moisture transmitted from the wall to the door cover.
2. If there is no threshold stone in the bathroom, then the door sleeve should be vacant from the ground for a distance, about 1cm, so as to block the water vapor that seeps into the door sleeve from the bathroom floor.
3. Paste a layer of fireproof board on the back of the door panel, which can block the water vapor infiltrated into the door sleeve indoors.
4. Choose ceramic tiles and stones for the door sleeve line on the side of the bathroom, which are beautiful in appearance and not afraid of water.
The waterproofing process inside the bathroom is very important, and many owners are probably deeply aware of this when they learn the common sense of decoration, after all, the bathroom is the most frequent area for every household to use water. What should I do if the bathroom door cover is moldy? The paint surface under the door cover of our own bathroom is blistered, and there are mildew spots, which inevitably makes us very upset, so let's take a look at the solution to the moldy bathroom door cover. >>>More
Be ventilated more, and if you have time, move the contents out to bask in the sun.
If it is serious, it can only be reinstalled, and the glue can be fined.
Bathroom mold is a more common phenomenon in modern families, and it is also a headache for many housewives. The following is to share some relevant toilet safety tips for you, I hope it will be helpful to you. >>>More
Due to the large number of water stains in the bathroom, mold spots often appear in the gaps between the walls and tiles, especially in the wet season. In the rainy season, some owners find that there are often mildew spots on the walls of the bathroom at home, and the mirror will also be blurred because of many watermarks, and the mildew spots in the gaps of the tiles are particularly obvious. Is there any way to prevent the wall from getting moldy again, and what should be done about the areas that are prone to mold in the bathroom? >>>More