-
Anonymous users2024-01-24In fact, the brand is not the point, it is important to pay attention to these:
The height of the toilet, sit on it and try the feeling.
The sink holds water.
The flushing capacity of the toilet.
What is the remaining water level after the toilet is flushed? (This is to see if the water splashes on the butt when the tuba is loaded).
-
Anonymous users2024-01-23Gloss and porcelain: The higher the gloss of the product, the higher the density, the easier it is to clean and hygienic. The higher the firing temperature and the more uniform it is, the better the porcelain quality and the longer the service life.
Generally, the glaze of high-quality sanitary ware is smooth and clean, without deflated ponds, color differences, needle eyes and lack of glaze, and the sound of striking ceramics with hard objects is crisp. Inferior products generally have more needle-eye spots, bumps, cracks and lack of glaze on the glaze.
The sewage discharge capacity of the toilet is a very important assessment standard, and there are four types of sewage discharge type: flush down type, siphon flush down type, siphon jet type and siphon whirlpool type.
1. Flushing toilet: the most popular traditional sewage method in the middle and low-grade toilets in China, which is easy to produce fouling, loud noise, cheap price and low water consumption.
2. Siphon flush toilet: the siphon principle is used to discharge the dirt, which is easy to produce splashing phenomenon, increase water consumption, and improve the noise problem.
3. Siphon jet toilet: Compared with the flush toilet, the jet annex is added, which speeds up the sewage discharge. Odors are reduced, splashing water is prevented, and noise problems have been improved.
4. Whirlpool toilet: the highest grade, and at the same time use the principle of vortex and siphon to discharge the dirt. The flushing process is fast and thorough, with low odor and low noise.
The quality of the water parts determines whether the toilet is used normally, and more than 90% of the problems appear on the water parts. When purchasing, you must carefully check the water parts, and it is best to install them before the factory leaves the factory to see whether the structure is compact, whether the movable connection parts are sensitive and reliable, and whether the water sealing part is smooth. The material of the water parts is copper or polymer material.
-
Anonymous users2024-01-22I think the first thing to look at is the appearance, the appearance is relatively smooth, no burrs, and it also depends on the height of the water level in the water tank, or it will not be clean when the time comes.
The following aspects should be considered.
1. Safety, the bathroom is damp, we must pay attention to the safety of electricity, the hair dryer, electric shower, etc. should be firmly connected, effectively connected to the ground, and the middle ground must not be messed up. Be careful not to have too many sharp edges and corners when tiling, so as not to cut when bathing. Try to install non-slip floor tiles to avoid slipping and falling. >>>More
If you guessed it right.
Your current bathroom floor is higher. >>>More
1. Be sure to plan well, planning in decoration is a waste of time, energy, manpower and material resources. Plan ahead such as the location of the sink, the location of the toilet, the location of the floor drain, the location of the bathtub, the location of the bathtub, the location of the lights, the location of the switch socket, etc. And the location and size of each place must be planned. >>>More
The bathroom should be separated as much as possible. The benefit of functional area separation is that each function can be used separately without being disturbed, and the use efficiency of the entire bathroom is improved.
The bathroom should be separated as much as possible. The benefit of functional area separation is that each function can be used separately without being disturbed, and the use efficiency of the entire bathroom is improved.