How about removing the paint from the security door and repainting it

Updated on Security door 2024-06-20
4 answers
  1. Anonymous users2024-01-24

    On the anti-theft door, at least 6 layers of paint, 3 degrees of anti-rust primer and 3 degrees of topcoat... It is not easy to polish off the original paint, and I am afraid that it will not be beneficial.

    Whether it is electric or sandpaper, the original primer will be worn off.

    According to you, the paint you bought does not match the original paint composition, and there are many types of topcoats, such as alkyd, propionic acid, etc., some of which are compatible. Therefore, it is easy to touch off.

    It is recommended to consult the building materials supermarket and buy a good paint. However, what you have sprayed before, it is difficult to remove it completely.

  2. Anonymous users2024-01-23

    Analysis: At least 6 coats of paint on the security door, 3 coats of anti-rust primer and 3 coats of topcoat.

    Solution: You can try to use paint remover and sandpaper to slowly grind the paint off.

  3. Anonymous users2024-01-22

    Paint strippers are required to remove paint from the surface of security doors.

  4. Anonymous users2024-01-21

    No matter what method you use, the result is cruel, because your home is not a factory and does not have that condition. I suggest that instead of spending money on tossing, it is better to add some money to re-order and replace one you like. (It's rare to decorate once a day, and it looks uncomfortable to go in and out every day).

Related questions
1 answers2024-06-20

This is a big project, if there is no pattern, it is easy to get it, if there is a pattern, it is estimated that it will be difficult to get. There is no other way but to grind it off with a mill. I don't know what you're trying to get rid of the paint on it.

2 answers2024-06-20

There are many ways to remove it, you can try the following methods: >>>More

1 answers2024-06-20

It can be sanded with an angle grinder with a wire brush, which is both labor-saving and clean.

2 answers2024-06-20

Hello! This one should be easy. However, you still have to pay attention to the material of your own security door, etc., so as not to backfire and make the security door have other flaws.

1 answers2024-06-20

I don't know what material your door is made of.

If it is a stainless steel door, you can use toothpaste, wipe it with a cloth, note: you can not use steel wool balls, it will scratch the decorative pattern. >>>More