Why does the hardwood floor sound after installation?

Updated on Solid wood 2024-06-06
4 answers
  1. Anonymous users2024-01-24

    Reasons why hardwood floors make sounds:

    1. The sound caused by uneven ground.

    2. The distance of the wooden keel is too far.

    3. The moisture content of the wooden keel varies greatly.

    4. Improper moisture-proof measures.

    5. Suspended paved floor.

    6. Insufficient reserved gaps.

    7. The impact of the use environment.

  2. Anonymous users2024-01-23

    1。The keel was not well laid, 2. Flooring doesn't work.

  3. Anonymous users2024-01-22

    When loading, the leveling is not good, and there is no leveling. There is also the keel installed too much.

  4. Anonymous users2024-01-21

    In general, the keel is not flattened.

Related questions
10 answers2024-06-06

It should only sound when you step on it, this one may be empty under the floor, uneven, when you step on it strongly, it will be concave, and after leaving, it will get up, and then there will be a sound.

2 answers2024-06-06

The wood itself is rarely made of black wood for flooring, which I have not seen in all my years of working in engineering. The situation you mentioned should be that when the worker is cutting the floor, the saw blade is used for a long time and the saw blade is not fast, resulting in the section of the floor being cut into a beard, and my previous carpenters often have this kind of problem.

4 answers2024-06-06

The flatness of the ground is not good, and it is most likely to be caused by no screeding! The possibility of being caused by the paving process is very small.

1 answers2024-06-06

Solid wood flooring will have some expansion and contraction due to environmental reasons, which is a natural phenomenon, if the void is not large, it does not need to be treated, and it will generally shrink by itself when the moisture content is reduced. >>>More

2 answers2024-06-06

1. Internal factors.

The discoloration of sports wood flooring is mainly caused by absorbing sunlight, and the degree of discoloration of the sapwood of wood and heartwood after absorbing sunlight is different, which will lead to a certain color difference of sports wood floor after paving. Sports wood flooring is made of solid wood, which has the natural properties of wood, and the photodiscoloration produced is a normal phenomenon, not a product quality problem. Most woods change color from light to dark, and only a few wood changes from dark to light, and the color change is basically the same on the same floor. >>>More