A piece of soap fell off the toilet plug and everyone had a good way

1 all with wire, coarse, the soap first into small pieces, and then rinse with hot water to accelerate its dissolution, there is no other good way, the hydrochloric acid you said is not a way, so the sewer is also dissolved, if your sewer is PVC, you can try hydrochloric acid.

If you really can't help it, it is better to suggest good workers to dredge it, it is a bit expensive for the New Year.

Generally, there are some hair and other things in the pipe, and a large piece of soap will cause a blockage, and now it has been blocked for two days, the soap should have rotted, if the pipe can barely leak some water, use a large bucket to catch two buckets of water and try to try If it is already blocked, find a worker as soon as possible, otherwise it is very inconvenient.

Buy a simple kind of toilet, not expensive, less than ten yuan, multi-pass, according to dozens of times, when to feel the state of flushing the same as before on O, I am this way, I haven't slept for a day and a night, and the effect of you looking for a toilet is not much better, they are also the same way to go to the toilet, don't forget to flush more after the toilet, my family is also such a piece of new soap fell into the toilet, but I was in a hurry, looking for property help, calling to ask about the sewer, In the end, it took me a day and a night to solve the task, not to mention the amount of water, not to mention a ton, and a dozen pots of hot water.

My personal experience is to take a thick hard steel wire, stick it in, stick it firmly on the soap, and slowly drag it out.

Hydrochloric acid will react with iron, be careful to burn the elbow of the sewer pipe, my family used to use hydrochloric acid, and it turned out that the downstairs leaked water and had to repair the sewer pipe.

If it is a toilet, it is recommended to find a plumbing repairman to remove the toilet so that it is easier to salvage If it falls into the floor drain, slowly mash it with a wire and then flush it with hot water several times It is absolutely not possible to use acid After the sewer pipe system has been used, a layer of oxide layer has been formed, which can effectively protect the pipeline corrosion If you wash it with acid, it will directly destroy this layer of oxide layer, and serious will erode through the pipe wall and cause perforation.

Pouring vinegar can speed up the dissolution, and the effect of hydrochloric acid is better.

How can hydrochloric acid be sold,, It depends on your family,,There should be ,,, in the school (high school, junior high school)Hehe and ,,, landlord can try vinegar.

Pour more hot water into it every few minutes (if you don't feel too smelly, you can pour some gasoline, and theoretically you can use cooking oil and alcohol instead), and flush down the soap when it is soft (or melted or smaller).

You can poke the toilet bowl or something; Shaped like a spring, more than a meter long, about two centimeters in diameter (irregular), there is a handle at the back that can be screwed, a drill bit in front (like the kind of drill that opens a wine bottle cork), and the middle section is like a spring that can be bent. Happy Chinese New Year!

There is no choice but to sacrifice your soap, it's simple, just pour hot water or salts into it.

Brewed in hot water, it should dissolve, and a longer time is possible.

You can't use acid, it is recommended to find someone to repair it at home.