How do I connect the shower room to the water heater, and do I need anything?

Updated on Shower room 2024-06-27
5 answers
  1. Anonymous users2024-01-24

    During civil construction, bury hot and cold water pipes in the wall, and set up two water outlet joints where the water heater is placed and where it is needed.

    If it is installed temporarily, use open tubes. Two Kaitai water pipes, four outlet valves. It is OK to connect them one by one with a hose.

  2. Anonymous users2024-01-23

    What kind of shower room are you? Is it simple or a whole room? Simply install the water heater in the room, and there is a water pipe at the back of the whole room, so you can connect it.

  3. Anonymous users2024-01-22

    Depending on the conditions under which it is connected, if it is connected directly, it is possible to connect the root pipe and connect a water wheel head.

  4. Anonymous users2024-01-21

    Three shower rooms should not be used at the same time, and from a practical point of view, a 16-liter gas water heater with three instantaneous electric water heaters is the best configuration.

  5. Anonymous users2024-01-20

    dfghdrfghdfghdfghdfghdfghdsfghdfg

Related questions
20 answers2024-06-27

The opening of the door of the small hallway should be removed if possible, and the antechamber of the bedroom is connected to the dining room. There is no need to add a leak to destroy the door cover. >>>More

3 answers2024-06-27

This has to be seen according to the house type, there are many kinds of partitions, you can make a sliding door, or make a bar counter for partitions.

1 answers2024-06-27

The ceilings in the living room and hallway should be separated. >>>More

11 answers2024-06-27

A: With a glass partition in the middle and a pink curtain inside, it will have a very different feeling. Think for yourself

2 answers2024-06-27

The bedroom and balcony are connected together to decorate the details as follows: >>>More