-
Anonymous users2024-01-24Is it on the wall with the wall tiles pasted? Direct expansion wire is drilled in the tile for installation, use a small drill bit, be careful that the tile is easy to break.
It's PVC, it's okay, and you have to choose marble for the use type.
Bathroom Door Installation – Step 1.
Before installation, it is necessary to open the package and inspect the goods, and carefully check the number, style, color, size and surface of the product with the naked eye detectable quality problems. The door leaf and door frame should be stacked indoors with a backing plate, the frame should be separated from the door leaf, and it is strictly forbidden to store it with acid and alkali, and the room should be clean, dry and ventilated. Store in an indoor room without a rack and separate from a heat source to protect from thermal deformation. >>>More
1.Make a hole in the floor slab.
2.Before the installation of the drainage pipeline, the civil engineering negotiation shall be required to pay off, find the size and height of the rejection of sanitary appliances, install it in turn from the main pipe, riser pipe to the branch pipe, and verify whether the coordinates are accurate again before the civil engineering plugs the floor hole. >>>More
The installation method of the toilet is as follows:
1. Unpack the toilet and check whether the product is in good condition and whether the accessories are complete. >>>More
In view of your problem, if the bathroom is a ground wire, the first circuit to come has a ground wire. You can pick up the coming circuit. Or bury more than a meter deep in the ground in the bathroom. Just put a metal substance on it, I hope it can help you, it's just a personal opinion.