-
The second time the pressure is reduced, and the water pressure is reduced.
-
The toilet is clogged, if you are not afraid of getting dirty, just take a wire and empty the toilet before flushing.
-
There may be vegetable leaves, sand, ...... in the waterClogged the toilet!
Look at what model the toilet is.
If it is by compression. >>>More
When the toilet bowl does not go under water, we must first calmly analyze the cause and then take corresponding solutions. >>>More
Because the U-shaped pipe is blocked, the water will not be smooth, and even flow out from the floor drain, you can use the snow leopard brand pipe to dredge, which can quickly dredge the toilet, the effect is very good, and it can also be used in the kitchen and other places, with the effect of cleaning the porcelain plate.
Ignore it, if it's just soap bubbles for five or six hours, look for a wire and poke it down.
1. See if there is a trap in the pipe. Because the toilet itself has a trap, there is air between the two traps, and the air pressure cannot be pressed. So it is impossible to enter the water. >>>More