-
Anonymous users2024-01-24First, clean the back of the pre-selected tiles and soak them in water for more than 2 hours. The purpose of water immersion is to allow the tile to absorb enough water in advance, so as not to absorb the moisture in the adhesive material after paving, affect the bonding strength or cause the adhesive material to shrink excessively and cause hollowing, debonding, etc.
After the tile is soaked in water, it should be removed from the water before paving, and the surface moisture should be wiped off with a cotton cloth or the surface moisture should be dried before paving.
Before the start of paving, the vertical line should also be hung on the wall leveling layer to determine the size line of the tile out of the wall, and pull the horizontal line, so that the surface can be smooth when paving, and the tile can be horizontal and vertical.
Ensure that the base surface should be firm, smooth, clean, no pollution, loose matter, hollow, etc., with curing agent, release agent, smooth concrete surface needs to be polished and rough after construction.
Add about 7 water with 25kg of tile adhesive powder, stir it into a uniform and particle-free mortar with an electric mixer, and leave it for 3 5 minutes and stir again.
The adhesive material should not be too thick, otherwise it is not easy to spread out, and it should not be too thin, otherwise the tile paste cannot be fixed and it is easy to fall.
Use a toothed scraper to evenly scrape the glue on the working surface, about 1 scrape each time, and then knead the tile on the working surface. If it is used for tiles or stones with deep back grooves, a toothed scraper should also be used to apply mortar on the back of the brick to ensure that the paste is full.
Depending on the contamination of the entire tile wall, the surface can be scrubbed with clean water.
-
Anonymous users2024-01-23Wine cabinet manufacturers provide slats of the same color and material as the wine cabinet, which are installed at the combination of wine cabinet and wall tiles.
Generally, it is closed with a door cover, which is very good-looking, imagine for yourself, the door cover is made the same color as the bedroom, and you can see if you like it or not.
The large white wall cannot be directly tiled, and the white wall will become soft and easy to fall off when damp (peeling phenomenon). Stick the tiles directly, and it won't take long for the tiles to all fall off. >>>More
Under normal circumstances, this will not be done, because the door of the wardrobe is not suitable for the kitchen door itself, if it is reluctantly done, it is really difficult to close the mouth, one is the original size, and the other is that the door hole is not so suitable. >>>More
The wine cabinet is not fixed! It is also possible that there is water vapor and wood soaking.
Choose the color of the kitchen due to the often have to "fire" the operation. Therefore, when choosing kitchen tiles, special attention should be paid to the color, and the kitchen tiles should be selected in light colors and more cold colors. At present, many kitchen tiles on the market are mostly white, in fact, you can also buy some light colors in the daily shun mall, such as light yellow, light blue, etc. >>>More