-
Anonymous users2024-01-24It is very likely that the toilet drain is not aligned with the sewer outlet, or the sewer pipe is blocked by foreign objects, and when there is sewage discharge, it cannot be discharged in time, and it will come up.
-
Anonymous users2024-01-23The flush hole is in the wrong direction, and the water will appear in a hurry.
-
Anonymous users2024-01-22Reverse flow caused by too strong impact.
Just install it with cement. For the sake of insurance, after the cement is dry, the structural adhesive is used to seal the edges.
1. The septic tank is not equipped with a ventilation pipe or the drainage pipe has no ventilation cap on the roof. >>>More
First of all, the range of choices about the brand of the toilet is still relatively large, of course, when choosing the toilet brand, it is still necessary to choose some well-known brands, so as to ensure the quality of the product. The common toilet brand in general personally thinks Wrigley is a very good choice. And the keyboard brand is very stable in quality, and it also has a very good reputation.
Before the toilet is installed, check whether there is any blockage of sediment and debris in the sewage pipe, and whether the installation ground is level. The toilet sewage pipe should be made of plastic pipes required by the national standards, and the inner wall of the pipe should be smooth, flat, no bubbles, no cracks, no obvious marks and depressions. In particular, it is necessary to ensure that the sewage pipe is about 10mm above the ground. >>>More
Do waterproofing needs to be done on the surface of the water, dig excellent permeability crystalline waterproofing, you can do it yourself on the cement surface with a super permeable waterproof guard (if there are cracks and potholes on the cement surface, fill the complete with metin porcelain glue and then do waterproofing). >>>More