How to find a location without destroying the tiles when the dark hole in the kitchen is blocked?

Updated on Kitchen 2024-06-07
1 answers
  1. Anonymous users2024-01-24

    Use a small hammer or metal rod to make a probing strike at the approximate position, and the sound of a cavity is the same. In addition, you can go downstairs to check the location size of the floor drain, which is basically fixed.

Related questions
10 answers2024-06-07

Boil a pot of boiling water directly into the sewer, but the oil should quickly solve the problem, in addition to the leather bowl can be sucked, the effect is also good, leather bowls are sold in stores that sell mop plastic and the like.

2 answers2024-06-07

Hello! Break the steel wire at the front end of the hand-cranked dredge with hand pliers to create a larger gap, and then dredge, and the stainless steel sheet spoon will definitely be bent and stuck on the dredger to take out; The slender and stiff spoon has a certain chance of being stuck and taken out, but if it doesn't work, you can only reach in and touch it, and if you can't touch it, you can only dismantle the toilet. >>>More

2 answers2024-06-07

Boil some boiling water and flush it down, and it will be clear in no time!

1 answers2024-06-07

Generally, most of the places where the kitchen sewer pipe is blocked are U-shaped bends, if it is a sewer pipe with a sewage screw, it is easy to do, unscrew it directly, but it is best to put a sewage basin at the bottom before treatment, so as not to stain the cabinet. After unscrewing, use a steel wire to pass both sides, and it can usually be solved quickly. If it has not been solved, you can remove all the sewer pipes, unscrew all the plastic connections, rinse them, remove the impurities inside, and assemble them in turn, which will be done in no more than half an hour.

3 answers2024-06-07

Soak in a hot water solution of caustic soda (sodium hydroxide).