-
Anonymous users2024-01-24Stainless steel, aluminum alloy, white tables, chairs, doors and windows and other films are a lot, sometimes.
If you don't tear it off in time for a long time, it will produce a sticky phenomenon version, what should I do?The following Sanquanchuan film introduces some simple and effective methods to remove adhesive.
1. Wipe it with a paper towel dipped in some alcohol (it is best to use industrial alcohol, or you don't need to use medical treatment) to wipe it, and then rub it a few times to be clean.
2. Use acetone. Same method as above. The amount is small and thorough, and the best thing is that it removes these residual gums very quickly and easily, which is better than sprinkling sperm. Both of these are solvents and are the most effective of all methods.
3. Use nail polish remover. The usage is the same as alcohol acetone. The effect is also very good. Nail polish remover does not require quality, good or average, as long as it can wash off the nail polish.
4. Use hand cream. Tear off the printed product on the surface first, then squeeze some hand cream on it, and slowly rub it with your thumb, and rub it for a while to rub off all the sticky residues. Just slow down.
Hand creams are oily substances and their properties are incompatible with glue. This is the use of this property for glue removal.
These Articles 3 and 4 are introduced in a column of CCTV 1. The material is easy to find and convenient, and it can remove residual glue.
5. Use banana water. It is an industrial agent used to remove paint, and it is also easy to buy (where paint is sold). The method is the same as alcohol acetone.
Apply a hot towel, scrape with a razor, and then eraser, very clean, and have wind oil essence at home. It's a good thing, and it's easy to solve your problem. Pay more attention to your life.
-
Anonymous users2024-01-23With wind oil essence, mine is like this, chemistry is learned like this.
-
Anonymous users2024-01-22I applied it with hot water. Then tear it off. Or bake it with a lighter and it will fall off.
You can find a place that is already a little up, and apply some wind oil essence (or other oily liquid objects) to the place where it is connected to the door, peel it a little more, and then peel it again, and so on several times, and then it will get better and better to peel, be patient! >>>More
If it is not good to tear, you can use a hair dryer to heat the side of the file to blow and tear!
Use a utility knife to gently scratch the aluminum strip, and then tear off the protective film, so that it is easy and thorough. >>>More
First find a corner of the edge of the protective film from the top of the door, and then carefully lift the corner of the protective film little by little, and then pull down little by little in the form of a diagonal according to the shape of the door, the force can not be too large, to ensure that the protective film will not be torn, the force should be even, if you accidentally tear it, find another corner, tear it in this way, and know that the surface of the door is smooth.
Is it that the plastic packaging on top of the paint can't be torn off? If yes, try WD 40, or an asphalt cleaner for cars, the former can penetrate into the crevices and make it easy to peel off, and the latter can be sprayed for a while to soften the plastic film without damaging the paint, and it can be wiped away.