-
Anonymous users2024-01-24The inner water tank must be full of water, and it can only be flushed when it is full. If you flush it, half a tank of water will be spent.
-
Anonymous users2024-01-23It shows that the toilet response speed is slow!
Reasons why the toilet bowl doesn't flush clean.
1.The side handle chain of the side press and side wrench toilet is long, so that the water stop pad stops the water very quickly, although it moves. >>>More
Generally, the toilet does not drain because the outlet at the bottom is not aligned with the drain, and the screws at the bottom of the toilet bowl are broken, which will cause the toilet to drain through, or the toilet has been used for a long time, and it will scale on the inner wall, and in serious cases, it will block the vent of the toilet bowl and cause the toilet to drain slowly, and it is also possible that the cement or tile fragments fall into it during decoration or will affect the drainage.
The old toilet tank does not come out of the water is not the fault of the float, the float only plays the function of controlling the water inlet of the water tank and terminating the water intake, you said that the water does not come out when you press the button, and the water comes out only when you pick up the cover, which is the reason why the connection cable between the button and the drain of the toilet tank has some length. >>>More
It's not that the toilet is broken, it's probably that the sewer pipe is a little blocked. >>>More
If it is an ordinary toilet, it will be poured with washbasin water at one time, and a siphon will be formed, and if it is some kind of smart toilet, it is a different matter.