More than 100 solid wood boards will not be deformed in the future

Updated on Solid wood 2024-06-28
1 answers
  1. Anonymous users2024-01-24

    Look at how thick it is, it must be easy to deform if it is thin, and be careful not to get wet, it is easy to deform when wet.

Related questions
1 answers2024-06-28

Fumigation is thorough and dry, and it is not easy to have insects, but there may still be insects when it is wet.

2 answers2024-06-28

You must have cracks in this, wood and plaster, tired will not stick together, but you can reduce the cracks to the minimum and minimum.

1 answers2024-06-28

Scars on pine wood are divided into "slipknots" and "dead knots". Since the "dead knot" is still growing on the pine, it has already separated from the tree and cracks have appeared, and it needs to be adhered later. Therefore, when buying pine furniture with a "dead knot", the dry and humidity will change over time, and the "dead knot" will easily fall off. >>>More

4 answers2024-06-28

Any wood, board will be deformed for a long time, solid wood cabinets will also, but don't care too much, when he is deformed, maybe the answer is more than the time when you need to replace the cabinet, be careful not to buy poor quality on the line. >>>More

5 answers2024-06-28

Priority front baffle thickness,Then consider others,8Inch bass,If the unit is relatively high-end,With 4 cm of solid wood planks will not be too thick,If the unit is relatively low-end,Or the power is relatively small,It is a little too heavy and wasteful,The internal space volume of the speaker is best to refer to the parameters of the speaker unit for reasonable calculation,It is better to use the computer to simulate the design。 It is recommended to choose a solid wood board with a relatively uniform wood grain density, and do not choose a board that is easy to crack and too rough.