How to tell if solid wood furniture is real solid wood

1. In terms of appearance, it should be natural and unpretentious.

There is a natural color difference in all solid wood furniture, and there are certain differences in color and texture, and there are few defects in the appearance of solid wood veneer furniture, and its texture is clear and even better than that of all solid wood furniture. You can use the texture and scar knot of solid wood to see the corresponding position on the surface and back respectively, and if it corresponds well, it is pure solid wood. In addition, looking at the scar is also a good way to identify pure wood, look at the location of one side of the scar, and then find out if there is a corresponding texture on the other side.

Cross-sectional view of timber.

For the identification of furniture with a combination of board and wood, in short, it is generally a man-made board in a large area such as wardrobe frames, shelves, drawer inner panels, etc. If the manufacturer pastes solid wood veneer on the outside of the wood-based panel, although the smooth surface improves the durability, the cross-section of the board will find that the grain of the two sides intersects, which is not in line with the normal growth direction of the tree, which is the main way to identify.

Do not let go of the subtle nail holes.

Some frames are made of solid wood, and the side panels, shelves, etc., are made of particleboard or MDF veneer, and the center of the board is actually plywood or various waste wood. This kind of furniture is difficult to identify by looking at the sample, but when it is installed after entering the site, it can be seen by the position of the nail hole, if it is particleboard, there are wood chips, and the MDF is pulp-like, which can be identified by using this feature.

The hand touches the nose and smells almost away.

You can use your hands to knock on the wood surface a few times, and the solid wood material will make a crisper sound, while the wood-based panel will have a deeper sound. In addition, solid wood veneer feels very textured, while general artificial paper veneer feels dry.

The most common but very effective way to do this is to smell the furniture up close. Most solid wood has the aroma of tree species, pine has a pine resin smell, cypress has a light fragrance, camphor wood has a clear camphor wood smell, but fiberboard and MDF will have a strong pungent smell, especially in the cabinet door or drawer, the smell is easier to distinguish. Using this convenient method of identification, I believe that the solid wood furniture that I judge must be the same.

The most commonly used effective method is to smell the smell of furniture up close, most solid wood furniture has the aroma of a tree species, pine has a pine resin smell, cypress has a light smell, camphor wood has a camphor wood smell and so on.

There is a natural color difference in solid wood furniture, and there are certain differences in its color and texture. It is entirely possible to use the texture and scars of solid wood to judge its quality.

The texture is natural, and then there is no white skin, and the smell can be judged by referring to the density on the net.

How to distinguish solid wood furniture: e69da5e6ba90323131333532363134313032313635333133365656638

From the pattern to distinguish, the pattern of pure solid wood furniture is not changing, while the pattern of veneer furniture changes very regularly, such as butterfly-shaped, or the head of the swastika constantly, while the pattern of pure solid wood furniture is irregular.

The furniture is not the process of opening the falcon, the falcon is one of the necessary processes for solid wood furniture, the so-called open falcon, that is, the slot, the junction of wood and wood is not glued and nailed, but just like the building blocks played when I was a child, it is put together, which is why solid wood furniture is environmentally friendly.

Splicing process, splicing is divided into two kinds, tooth joint and flat joint, as the name suggests, tooth joint, is two pieces of selected wood, both ends are played like sawtooth teeth, and then two pieces together, this is the tooth joint, if there is a tooth joint process of furniture, take the door panel of the wardrobe, the door interface inside and outside the door must be on the right.

Solid wood furniture should generally be designed with rounded corners, because only wood can withstand the pressure of cutting into arcs, and the layout is impossible.

Pseudo-"solid wood furniture can generally be divided into two situations:

1. Solid wood veneer furniture.

Solid wood veneer furniture is mainly based on man-made panels, and a layer of solid wood veneer is pasted on the surface of the substrate, and at the same time, it is brushed with open-hole paint. To distinguish this type of furniture, you can mainly look at the intersection of two adjacent interfaces, which usually do not turn, but are pasted on each side, so the patterns of the two sides are usually not connected. Moreover, the surface of veneer furniture is usually very smooth, and there is no solid feel of solid wood.

2. Wood-based panels.

There is also a kind of "solid wood furniture" with man-made panels, in this case, the scar of the furniture can become our judgment standard, the general solid wood furniture has a natural color difference, color and texture also have a certain difference, observe the front and back position of the scar, if the front and back correspond very well, it proves that it is pure solid wood.

Hello, the selection of solid wood, drying source, finger jointing, seam and other requirements are very strict, if the process is not strict, the small cracking, the joint is loose and other phenomena, the whole set of furniture is deformed, so that it can not be used. Discrimination can be analyzed from the following points:

One: Listen to the percussion echo everywhere.

Two: look at the curvature and wood grain.

Three: The touch of the wood grain is natural and smooth and there are no seams.

Four: see whether the solid wood furniture is made of solid wood.

Five: distinguish the real from the fake according to the weight of the wood.

Go buy copy

furniture, many merchants will claim to be their own.

Bai "pure solid wood", although we do not necessarily have to buy pure solid wood furniture, dao can be a business to deceive people, in fact, many so-called pure solid wood, but a layer of solid wood veneer on the surface, identification is also very simple: just look at the corners of the furniture, that is, look at the section of the board, to see whether the texture of the wood on the side and surface is coherent.

The wood grain of pure solid wood must be connected, and the veneered furniture can only be pasted with another piece of wood veneer for the section, which cannot be connected with the surface of the wood grain. Of course, it does not mean that veneer furniture is not good and cannot be bought, in fact, this veneer furniture also has its advantages: it is not easy to crack, etc.

It's just that the price of this kind of patch furniture and pure solid wood furniture should be different.

On the outside of the solid wood, you can see the natural texture and changeable shapes.

But now there are a lot of imitation solid wood on the market, and there are mixes and matches.

Be observant when all purchases.

Open the cabinet drawer and see more Solid wood furniture can retain its value.

Maintenance is also very important, and I hope it helps you.

The back is not painted to look at the back, and if you brush it, you can see that the texture is consistent and inconsistent.

1. Look: There is a natural color difference in all solid wood furniture, and there are differences in texture, and there are few defects in the appearance of solid wood veneer furniture, and its texture is clear and even better than that of all solid wood furniture. Looking at the scar knot is a good way to identify pure solid wood, look at the location of one side of the scar, and then look for the corresponding texture on the other side.

In addition, you can see the position of the nail hole during installation, if it is particleboard, there will be wood chips, and MDF will be pulp-like.

2. Smell: Most solid wood has the aroma of tree species, pine has the smell of pine resin, cypress has a light fragrance, and camphor wood has an obvious camphor smell, but fiberboard and MDF will have a strong pungent smell, especially in the cabinet door or drawer.

3. Touch: Solid wood veneer feels smooth and textured, while general artificial paper skin feels dry.

4. Knock: Consumers can knock on the wood surface a few times with their hands, and the solid wood material will make a crisper sound, while the wood-based panel will have a low sound.

Generally speaking, real solid wood furniture rarely has a perfect texture, based on the environment in which the wood grows completely naturally, and this change can be reflected in the appearance of the wood itself, so most of the solid wood furniture has natural color differences, and most of its textures have certain differences. The "pseudo-solid wood" due to the appearance can be veneered or some mega dispersion other techniques to make the texture have a strong sense of "a mold out", in the appearance can be described as "flawless", basically this kind of wood is not solid wood but processed wood. And because the production of solid wood furniture uses a whole piece of original wood board, so consumers can see the relative position of the appearance and back of the solid wood furniture, if the texture and scar can be well corresponded, it is pure solid wood.

In fact, there is one of the simplest and most crude methods, which is to dissect it! Artificial boards can intuitively see the appearance of different materials squeezed together, and the texture color will appear extremely abrupt, while the solid wood material will have color difference and texture differences, but the transition of various differences is still very soft and will not have a sense of disobedience. <>

Go to the furniture city more, they will be eager to show you where the advantages of his solid wood furniture and other people's homes are, complement each other There seems to be walnut wood very popular recently, but the 2-room house is more than 100,000 yuan, and I can't afford to be hungry. Off topic, I think that most people can accept solid wood furniture should be made of solid wood tooth joints, you don't ask Lingzhen he won't say. I once saw that the sales person said so high, so I asked you to say that there are so many advantages, is there any bad car disadvantages.

She said there were no drawbacks. So no matter whether it is a combination of solid wood or sakamu, the main thing is the price to blame, on the basis of economic ability, try to buy a big brand, it should be okay. <>

If consumers want to buy real solid wood furniture, they must understand some relevant knowledge of solid wood furniture in advance, so that they know what to expect, and do not be easily deceived by some unscrupulous businesses. So how to identify solid wood furniture? In this regard, the reporter interviewed Mr. Ma, who has many years of experience in making solid wood furniture.

The other party pointed out that there are only four points to identify solid wood furniture: one look, two smells. Three knocks, four knocks.

A look: Generally speaking, the real macro grip difference solid wood furniture rarely has a perfect texture, most of the natural color difference, and most of its texture has a certain difference, while the "pseudo solid wood" furniture has a clear texture, in the appearance can be described as "flawless". In addition, it can also be identified by the "scar identification method" of pure solid wood, consumers can see the appearance of solid wood furniture and the relative position of the back, if the texture and scar knots can be well corresponding, it is pure solid wood.

Second smell: most of the solid wood has the natural aroma of trees, such as cypress has a light fragrance, pine has a pine resin fragrance, camphor wood will have an obvious camphor smell, and some man-made boards will have a strong pungent odor, such as formaldehyde. In particular, some closed lockers, such as drawers or the inside of a wardrobe, smell easy to distinguish.

Three knocks: In addition, when purchasing, consumers can also identify by the sound of hitting the wood surface with their hands, generally speaking, solid wood furniture will make a crisper sound, and the sound of man-made panel products is relatively low. Tick:

Consumers can also identify by the feel, in terms of weight, solid wood furniture is slightly lighter than particleboard, MDF furniture, and solid wood leather does not have a surface to feel more textured, while the general man-made panel furniture feels drier. <>