-
Anonymous users2024-01-24With three layers of 12mm thick high-density fiberboard clamps and two layers of 2mm thick silent Bao environmental protection sound insulation felt, the problem of cabinet sound insulation can be perfectly solved.
As shown in the figure, its structure is as follows: 12mm thick high-density fiberboard + 2mm thick silent treasure sound insulation felt + 12mm thick high-density fiberboard + 2mm thick silent treasure sound insulation felt + 12mm thick high-density fiberboard.
According to the actual measurement, the sound insulation of such a structure can reach more than 45dB (A), which meets the national standard in the Code for Sound Insulation Design of Civil Buildings GB 50118-2010; When the cabinets on both sides are filled with clothes, bedding, etc., and the cabinet doors are closed, the sound insulation can reach 5dB (A), which is equivalent to the sound insulation standard for high-end residential buildings in the Code for Sound Insulation Design of Civil Buildings GB 50118-2010.
The weight of high-density fiberboard per square meter should not be less than 12kg, if it is not easy to buy, it can be replaced by a 10mm thick cement pressure board or calcium silicate board.
-
Anonymous users2024-01-23It doesn't work well. Sound insulation should completely block the transmission of sound, so the material of sound insulation requires large density and quality, and it is airtight. The sound insulation of the partition can be used with many materials, such as bricks, acoustic panels, etc.
The sound insulation effect is the advantages and disadvantages are directly proportional to the quality of the materials you use, and the greater the quality, the better the sound insulation effect. There are many materials on the market that can be used for sound insulation, as long as the principle of density is followed. Coupled with a reasonable construction method, there is no problem at all.
-
Anonymous users2024-01-22The brand of quiet cubic soundproof window is better.
If half of the enlarged wardrobe and half of the TV wall are visually uncomfortable and not uniform, your large wardrobe can only be placed on the wall opposite the bed, so the large wardrobe is not necessarily closed, you can divide the left 1 3 to make 2 cabinet doors, the middle part to put the TV, and the right to make 2 cabinet doors.
If you can accept it, combine the door with the TV wall modeling, that is, make the door an invisible door!
Any decoration design has its principles that should be followed, as long as you understand the principles of its decoration design, follow the principles will not appear improper design problems, the background wall design is the same, and then let's learn about the three principles to be paid attention to in TV wall design: >>>More
Actually, there is no good or bad. However, if you live in a building, the noise from the downpipe at night may interfere with sleep. If possible, it is better to stay away from the bathroom.
This is not recommended, although it will make the most of the space. However, the disadvantage is that the sound insulation effect is very poor, if the wardrobe is filled with clothes and cotton wool, it may have an effect, but it is impossible in life, so the wardrobe is a partition, and the effect is very poor.